{"title":"动态挥发性有机化合物浓度下吸附过滤器模型的实验验证:预测长期效率","authors":"Ruiyan Zhang, Ziying Li, Xiangyuan Guan, Xin Wang, Fei Wang, Lingjie Zeng, Zhenhai Li","doi":"10.1007/s12273-024-1135-4","DOIUrl":null,"url":null,"abstract":"<p>Indoor volatile organic compound (VOC) concentrations are often dynamic because the ventilation and emission rates of VOC usually change. Adsorption filters used for air purification may operate with a capacity that fluctuates with unsteady VOC concentrations in buildings. Modeling the dynamic interactions between adsorption filters and indoor air is crucial for predicting their performance under real-world conditions. This study presents a numerical model of partially reversible adsorption equilibrium coupled with a mass transfer model to create a predictive model for adsorption efficiency in environments with dynamic VOC concentrations. A honeycomb adsorption filter for benzene adsorption was simulated and tested, including the breakthrough and purging curve and the long-term efficiency in an experimental chamber with dynamic concentrations. The results reveal that the curve generated with the partially reversible adsorption equilibrium model closely aligns with the measured one. Furthermore, the model was coupled with a chamber model and the simulation results were compared with those calculated using the filter model with a single adsorption isotherm. When VOCs were emitted intermittently in the chamber and there was sufficient ventilation, the concentration peaks in the chamber derived from the models with different assumptions on adsorption reversibility were significantly different from each other. Moreover, it was observed that the reversible adsorption capacity of the filter was crucial for long-term operation in rooms with dynamic concentration. Despite the reversible adsorption capacity constituting only 6.7% of the total adsorption capacity of the tested filter, it contributes to a significant “peak shaving and valley filling” effect, even when the irreversible adsorption capacity is saturated. The adsorption reversibility should be taken as an important parameter for selecting adsorbents for dynamic concentration conditions.</p>","PeriodicalId":49226,"journal":{"name":"Building Simulation","volume":"45 1","pages":""},"PeriodicalIF":6.1000,"publicationDate":"2024-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental validation of adsorption filter model under dynamic VOC concentrations: Prediction of long-term efficiency\",\"authors\":\"Ruiyan Zhang, Ziying Li, Xiangyuan Guan, Xin Wang, Fei Wang, Lingjie Zeng, Zhenhai Li\",\"doi\":\"10.1007/s12273-024-1135-4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>Indoor volatile organic compound (VOC) concentrations are often dynamic because the ventilation and emission rates of VOC usually change. Adsorption filters used for air purification may operate with a capacity that fluctuates with unsteady VOC concentrations in buildings. Modeling the dynamic interactions between adsorption filters and indoor air is crucial for predicting their performance under real-world conditions. This study presents a numerical model of partially reversible adsorption equilibrium coupled with a mass transfer model to create a predictive model for adsorption efficiency in environments with dynamic VOC concentrations. A honeycomb adsorption filter for benzene adsorption was simulated and tested, including the breakthrough and purging curve and the long-term efficiency in an experimental chamber with dynamic concentrations. The results reveal that the curve generated with the partially reversible adsorption equilibrium model closely aligns with the measured one. Furthermore, the model was coupled with a chamber model and the simulation results were compared with those calculated using the filter model with a single adsorption isotherm. When VOCs were emitted intermittently in the chamber and there was sufficient ventilation, the concentration peaks in the chamber derived from the models with different assumptions on adsorption reversibility were significantly different from each other. Moreover, it was observed that the reversible adsorption capacity of the filter was crucial for long-term operation in rooms with dynamic concentration. Despite the reversible adsorption capacity constituting only 6.7% of the total adsorption capacity of the tested filter, it contributes to a significant “peak shaving and valley filling” effect, even when the irreversible adsorption capacity is saturated. The adsorption reversibility should be taken as an important parameter for selecting adsorbents for dynamic concentration conditions.</p>\",\"PeriodicalId\":49226,\"journal\":{\"name\":\"Building Simulation\",\"volume\":\"45 1\",\"pages\":\"\"},\"PeriodicalIF\":6.1000,\"publicationDate\":\"2024-06-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Building Simulation\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1007/s12273-024-1135-4\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CONSTRUCTION & BUILDING TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Building Simulation","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s12273-024-1135-4","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
Experimental validation of adsorption filter model under dynamic VOC concentrations: Prediction of long-term efficiency
Indoor volatile organic compound (VOC) concentrations are often dynamic because the ventilation and emission rates of VOC usually change. Adsorption filters used for air purification may operate with a capacity that fluctuates with unsteady VOC concentrations in buildings. Modeling the dynamic interactions between adsorption filters and indoor air is crucial for predicting their performance under real-world conditions. This study presents a numerical model of partially reversible adsorption equilibrium coupled with a mass transfer model to create a predictive model for adsorption efficiency in environments with dynamic VOC concentrations. A honeycomb adsorption filter for benzene adsorption was simulated and tested, including the breakthrough and purging curve and the long-term efficiency in an experimental chamber with dynamic concentrations. The results reveal that the curve generated with the partially reversible adsorption equilibrium model closely aligns with the measured one. Furthermore, the model was coupled with a chamber model and the simulation results were compared with those calculated using the filter model with a single adsorption isotherm. When VOCs were emitted intermittently in the chamber and there was sufficient ventilation, the concentration peaks in the chamber derived from the models with different assumptions on adsorption reversibility were significantly different from each other. Moreover, it was observed that the reversible adsorption capacity of the filter was crucial for long-term operation in rooms with dynamic concentration. Despite the reversible adsorption capacity constituting only 6.7% of the total adsorption capacity of the tested filter, it contributes to a significant “peak shaving and valley filling” effect, even when the irreversible adsorption capacity is saturated. The adsorption reversibility should be taken as an important parameter for selecting adsorbents for dynamic concentration conditions.
期刊介绍:
Building Simulation: An International Journal publishes original, high quality, peer-reviewed research papers and review articles dealing with modeling and simulation of buildings including their systems. The goal is to promote the field of building science and technology to such a level that modeling will eventually be used in every aspect of building construction as a routine instead of an exception. Of particular interest are papers that reflect recent developments and applications of modeling tools and their impact on advances of building science and technology.