Utilization of agro waste activated carbons as carbon black replacement in electron beam irradiated styrene butadiene rubber composites

Purpose

This study aims to prepare activated carbon (AC) and activated biochar (BC) from sugarcane bagasse (SCB) can be used as carbon black (CB) replacement for styrene butadiene rubber (SBR) composites cured by electron beam (EB) radiation.

Design/methodology/approach

This study is carried out to investigate the effect of partial replacement of CB (as traditional filler) by AC or BC prepared from low-cost agricultural wastes (SCB) to improve the properties of SBR rubber cured by EB radiation (doses from 25 to 150 kGy).

Findings

The results indicated that the addition of AC or BC leads to improve the physical and mechanical properties of SBR with increasing irradiation dose [especially at concentration of 10 parts per hundred part of rubber (phr) from BC]. Also in this study, this paper examines how exposure of SBR rubber composites to ultraviolet (UV) radiation changes the mechanical properties for these composites, to do that, the specimens were examined before and after they were exposed to UV radiation for 300 h. The results showed that, the irradiated SBR composites, UV exposure, exhibit better retention in mechanical properties as compared with unirradiated ones, and the samples loaded with CB hybrid with ACs had an increased value of tensile strength (TS) retention as compared with blank sample.

Originality/value

The importance of this study is that, the production of AC from SCB offers a huge opportunity to overcome the problem of the disposal of SCB.