Compressive behavior of sustainable rubberized concrete‐filled steel tube columns having various recycled tire rubber aggregate contents and developing a predictive design model

As a sustainable solution, employing recycled tire rubber aggregates in the production of concrete is of considerable interest. However, the applicability of rubberized concretes in construction is restricted due to their relatively low mechanical performance. Using rubberized concrete as a filling material in a steel tube provides a suitable solution for overcoming this issue and for using it effectively as a load‐bearing element. The objective of this study is to examine the impact of the material characteristics of the sustainable rubberized concrete‐filled steel tube (Ru‐CFST) and develop a design model based on ultimate strength prediction for the axially loaded Ru‐CFST stub columns with varying contents of tire rubber aggregate. The model was developed through the gene expression programming (GEP) technique by employing the experimental test results to determine the ultimate compressive strength of Ru‐CFST columns. Based on the principal component analysis, the sectional properties of the load‐bearing element (such as outer diameter, thickness, and length), material strengths (such as rubberized concrete and steel tube strengths), and rubber content were determined as statistically significant parameters affecting the ultimate axial strength of Ru‐CFST stub columns and thus, they were considered in the stage of the model generation. Furthermore, the proposed model's performance was compared to that of available models suggested for traditional CFST columns by commonly employed design codes, namely, ACI, AIJ, AISC, CSA, EC4, and GB. Based on the statistical analysis of the results, it can be concluded that the existing formulations have a relatively acceptable randomness and scatter of observations within the distribution, while the proposed design model gives a more accurate prediction for the ultimate bearing capacity of axially loaded Ru‐CFST columns with the highest R‐squared value of about 0.99 and the comparatively lowest mean absolute percent error of 7.54. It can be stated that the proposed GEP‐based design model will encourage engineers to use such sustainable structural members in their designs and constructions.