Discrepancies in dynamic yield stress measurements of cement pastes

The dynamic yield stress associated with the flow cessation of cement pastes is measured using a rheometer equipped with various shear geometries such as vane, helical, sandblasted co-axial cylinders, and serrated parallel plates, as well as with the mini-cone spread test. Discrepancies in yield stress values are observed for cement pastes at various volume fractions, with one to two orders of magnitude difference between vane, helical and mini-cone spread measurements on the one hand, and co-axial cylinder and parallel plate measurements on the other hand. To understand this discrepancy, the flow profile of a cement paste in the parallel-plate geometry is investigated with a high-speed camera, revealing the rapid formation of an un-sheared band near the static bottom plate. The width of this band depends upon the rotational velocity of the top plate, and upon the shear time. Recalculation of shear stress shows that the reduced sheared gap alone cannot explain the low measured yield stress. Further exploration suggests the formation of zones with lower particle content, possibly linked to cement particle sedimentation. Here, we argue that the complex nature of cement pastes, composed of negatively buoyant non-Brownian particles with attractive interactions due to highly charged nano-size hydration products, accounts for their complex rheological behavior.