A rescue treatment to release the twist of a flow re-direction endoluminal device

A flow redirection endoluminal device (FRED) is a widely used flow diverter stent. Although high technical success and good treatment results were reported in the SAFE study, cases of technical failure of deployment have also been reported. A case in which a FRED was deployed with the proximal part twisted, but successful deployment was achieved, is presented. A woman in her 40s was diagnosed with a left internal carotid artery aneurysm during radiological investigations for headaches. Due to her family’s strong history of cerebral aneurysms, she opted for preventive treatment. A 5.5-mm FRED was selected because the proximal vessel diameter was ≥5 mm. However, the stent was deployed with the proximal side twisted. Fortunately, using a Scepter C and a CHIKAI 315 cm, the true lumen could be secure, the wire was guided distally, and the FRED was successfully placed. Later, with the patient’s consent, a 3D blood vessel model was created, and whether the stent was difficult to open or whether it was just a technical problem which was verified experimentally. Precisely, the same situation as during the surgery was recreated, and the stent was deployed in the same way. A FRED is an effective device, but there are cases of difficult deployment. The present method may be an option if a FRED is difficult to open.