热暴露温度和时间对 TiAlSiN 梯度涂层摩擦和磨损性能的影响

IF 2.1 4区 材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY JOM Pub Date : 2024-08-08 DOI:10.1007/s11837-024-06793-y
Yan Wu, Yongle Xie, Jiawei Gu, Lihong Yang
{"title":"热暴露温度和时间对 TiAlSiN 梯度涂层摩擦和磨损性能的影响","authors":"Yan Wu,&nbsp;Yongle Xie,&nbsp;Jiawei Gu,&nbsp;Lihong Yang","doi":"10.1007/s11837-024-06793-y","DOIUrl":null,"url":null,"abstract":"<div><p>TiAlSiN gradient coatings were applied onto a cemented carbide steel substrate using cathodic arc ion plating technology. High-temperature oxidation experiments were conducted on the coatings in a box-type Maffei furnace to investigate the impact of thermal exposure temperature and duration on the surface morphology and wear characteristics of the TiAlSiN gradient coatings. The study revealed that the surface flatness of the coating remained stable after exposure to temperatures between 600 and 800°C for 1 h, with no oxides detected in the physical phase analysis. However, at 900°C, the surface flatness deteriorated, and TiO, TiO<sub>2</sub>, and Al<sub>2</sub>O<sub>3</sub> oxides were identified. Subsequent tests at 800°C for 0.5, 1, and 2 h showed that the coating maintained good surface flatness, dominated by AlN and TiN phases, with no oxide formation. Specifically, at 800°C for 1 h, the coating exhibited reduced surface roughness and wear volume compared to 900°C for the same duration, by 0.03% and 39% respectively. After 2 h at 800°C, the wear volume was 2.13 times that of 1 h at the same temperature. Overall, the TiAlSiN gradient coatings demonstrated excellent wear resistance and thermal stability at high temperatures of 600°C and 700°C, as well as at 800°C for 0.5 and 1 h.</p></div>","PeriodicalId":605,"journal":{"name":"JOM","volume":null,"pages":null},"PeriodicalIF":2.1000,"publicationDate":"2024-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Thermal Exposure Temperature and Time on Friction and Wear Properties of TiAlSiN Gradient Coatings\",\"authors\":\"Yan Wu,&nbsp;Yongle Xie,&nbsp;Jiawei Gu,&nbsp;Lihong Yang\",\"doi\":\"10.1007/s11837-024-06793-y\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>TiAlSiN gradient coatings were applied onto a cemented carbide steel substrate using cathodic arc ion plating technology. High-temperature oxidation experiments were conducted on the coatings in a box-type Maffei furnace to investigate the impact of thermal exposure temperature and duration on the surface morphology and wear characteristics of the TiAlSiN gradient coatings. The study revealed that the surface flatness of the coating remained stable after exposure to temperatures between 600 and 800°C for 1 h, with no oxides detected in the physical phase analysis. However, at 900°C, the surface flatness deteriorated, and TiO, TiO<sub>2</sub>, and Al<sub>2</sub>O<sub>3</sub> oxides were identified. Subsequent tests at 800°C for 0.5, 1, and 2 h showed that the coating maintained good surface flatness, dominated by AlN and TiN phases, with no oxide formation. Specifically, at 800°C for 1 h, the coating exhibited reduced surface roughness and wear volume compared to 900°C for the same duration, by 0.03% and 39% respectively. After 2 h at 800°C, the wear volume was 2.13 times that of 1 h at the same temperature. Overall, the TiAlSiN gradient coatings demonstrated excellent wear resistance and thermal stability at high temperatures of 600°C and 700°C, as well as at 800°C for 0.5 and 1 h.</p></div>\",\"PeriodicalId\":605,\"journal\":{\"name\":\"JOM\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.1000,\"publicationDate\":\"2024-08-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"JOM\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11837-024-06793-y\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"JOM","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11837-024-06793-y","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

采用阴极电弧离子镀技术将 TiAlSiN 梯度涂层应用于硬质合金钢基体。在箱式马菲炉中对涂层进行了高温氧化实验,以研究热暴露温度和持续时间对 TiAlSiN 梯度涂层表面形貌和磨损特性的影响。研究表明,在 600 至 800°C 的温度下暴露 1 小时后,涂层的表面平整度保持稳定,在物相分析中未检测到氧化物。但在 900°C 时,表面平整度变差,并发现了 TiO、TiO2 和 Al2O3 氧化物。随后在 800°C 下进行的 0.5、1 和 2 小时测试表明,涂层保持了良好的表面平整度,以 AlN 和 TiN 相为主,没有形成氧化物。具体来说,在 800°C 下 1 小时,涂层的表面粗糙度和磨损量比在 900°C 下相同时间内分别降低了 0.03% 和 39%。在 800°C 下 2 小时后,磨损体积是相同温度下 1 小时的 2.13 倍。总之,TiAlSiN 梯度涂层在 600°C 和 700°C 高温下,以及在 800°C 下 0.5 小时和 1 小时内,都表现出优异的耐磨性和热稳定性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Effect of Thermal Exposure Temperature and Time on Friction and Wear Properties of TiAlSiN Gradient Coatings

TiAlSiN gradient coatings were applied onto a cemented carbide steel substrate using cathodic arc ion plating technology. High-temperature oxidation experiments were conducted on the coatings in a box-type Maffei furnace to investigate the impact of thermal exposure temperature and duration on the surface morphology and wear characteristics of the TiAlSiN gradient coatings. The study revealed that the surface flatness of the coating remained stable after exposure to temperatures between 600 and 800°C for 1 h, with no oxides detected in the physical phase analysis. However, at 900°C, the surface flatness deteriorated, and TiO, TiO2, and Al2O3 oxides were identified. Subsequent tests at 800°C for 0.5, 1, and 2 h showed that the coating maintained good surface flatness, dominated by AlN and TiN phases, with no oxide formation. Specifically, at 800°C for 1 h, the coating exhibited reduced surface roughness and wear volume compared to 900°C for the same duration, by 0.03% and 39% respectively. After 2 h at 800°C, the wear volume was 2.13 times that of 1 h at the same temperature. Overall, the TiAlSiN gradient coatings demonstrated excellent wear resistance and thermal stability at high temperatures of 600°C and 700°C, as well as at 800°C for 0.5 and 1 h.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
JOM
JOM 工程技术-材料科学:综合
CiteScore
4.50
自引率
3.80%
发文量
540
审稿时长
2.8 months
期刊介绍: JOM is a technical journal devoted to exploring the many aspects of materials science and engineering. JOM reports scholarly work that explores the state-of-the-art processing, fabrication, design, and application of metals, ceramics, plastics, composites, and other materials. In pursuing this goal, JOM strives to balance the interests of the laboratory and the marketplace by reporting academic, industrial, and government-sponsored work from around the world.
期刊最新文献
Review of Solid-State Consolidation Processing Techniques of ODS Steels (Hot Extrusion, Hot Isostatic Pressing, Spark Plasma Sintering, and Stir Friction Consolidation): Resulting Microstructures and Mechanical Properties TMS Meeting Headlines In the Final Analysis Optimizing CZ Silicon Crystal Growth: Algorithmic Approach for Defect Minimization Exploration of Microstructural and Physical Characteristics in a Newly Formulated Ceramic Utilizing Kaolin and Waste MgO-C Refractory Bricks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1