The corrosion analysis of X80 pipeline steel welded joint using wire beam electrode and numerical simulation methods

Purpose

The purpose of this study is to characterize the galvanic corrosion behavior of a simulated X80 pipeline steel welded joint (PSWJ) reconstructed by the wire beam electrode (WBE) and numerical simulation methods.

Design/methodology/approach

The galvanic corrosion of an X80 PSWJ was studied using WBE and numerical simulation methods. The microstructures of the coarse-grained heat affected zone, fine-grained heat affected zone and intercritical heat affected zone were simulated in X80 pipeline steel via Gleeble thermomechanical simulation processing.

Findings

Comparing the corrosion current density of coupled and isolated weld metal (WM), base metal (BM) and heat-affected zone (HAZ), the coupled WM exhibited a higher corrosion current density than isolated WM; the coupled BM and HAZ exhibited lower corrosion current densities than isolated BM and HAZ. The results exhibited that the maximum anodic galvanic current fitted the Gumbel distribution. Moreover, the numerical simulation results agreed well with the experimental data.

Originality/value

This study provides insight into corrosion evaluation of heterogeneous welded joints by a combination of experiment and simulation. The method of reconstruction of the welded joint has been proven to be a feasible approach for studying the corrosion behavior of the X80 PSWJ with high spatial resolution.