Matteo Castellani, Owen Medeiros, Reed A. Foster, Alessandro Buzzi, Marco Colangelo, Joshua C. Bienfang, Alessandro Restelli, Karl K. Berggren
{"title":"用于百万像素阵列的集成了超导纳米线单光子探测器的纳米ryotron波纹计数器","authors":"Matteo Castellani, Owen Medeiros, Reed A. Foster, Alessandro Buzzi, Marco Colangelo, Joshua C. Bienfang, Alessandro Restelli, Karl K. Berggren","doi":"10.1103/physrevapplied.22.024020","DOIUrl":null,"url":null,"abstract":"Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. In particular, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><msup><mn>10</mn><mn>6</mn></msup></math> readout lines. Performing signal-processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrate that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires patterned on niobium nitride thin films. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><mi>N</mi></math>-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof of principle, we first experimentally demonstrate the building block of the counter, an integer-<math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><mi>N</mi></math> frequency divider with <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><mi>N</mi></math> ranging from 2 to 5. Then, we demonstrate photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a two-digit nanocryotron counter partially integrated on chip. The two-digit counter can operate in either base 2 or base 3, with a bit-error rate lower than <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><mn>2</mn><mo>×</mo><msup><mn>10</mn><mrow><mo>−</mo><mn>4</mn></mrow></msup></math> and a count rate of <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><msup><mn>10</mn><mn>7</mn></msup><mspace width=\"0.2em\"></mspace><msup><mrow><mrow><mi mathvariant=\"normal\">s</mi></mrow></mrow><mrow><mo>−</mo><mn>1</mn></mrow></msup></math>. We simulate circuit architectures for integrated readout of the counter state and we evaluate the capabilities of reading out an SNSPD megapixel array that would collect up to <math display=\"inline\" overflow=\"scroll\" xmlns=\"http://www.w3.org/1998/Math/MathML\"><msup><mn>10</mn><mn>12</mn></msup></math> counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.","PeriodicalId":20109,"journal":{"name":"Physical Review Applied","volume":"28 1","pages":""},"PeriodicalIF":3.8000,"publicationDate":"2024-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays\",\"authors\":\"Matteo Castellani, Owen Medeiros, Reed A. Foster, Alessandro Buzzi, Marco Colangelo, Joshua C. Bienfang, Alessandro Restelli, Karl K. Berggren\",\"doi\":\"10.1103/physrevapplied.22.024020\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. In particular, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><msup><mn>10</mn><mn>6</mn></msup></math> readout lines. Performing signal-processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrate that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires patterned on niobium nitride thin films. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><mi>N</mi></math>-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof of principle, we first experimentally demonstrate the building block of the counter, an integer-<math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><mi>N</mi></math> frequency divider with <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><mi>N</mi></math> ranging from 2 to 5. Then, we demonstrate photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a two-digit nanocryotron counter partially integrated on chip. The two-digit counter can operate in either base 2 or base 3, with a bit-error rate lower than <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><mn>2</mn><mo>×</mo><msup><mn>10</mn><mrow><mo>−</mo><mn>4</mn></mrow></msup></math> and a count rate of <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><msup><mn>10</mn><mn>7</mn></msup><mspace width=\\\"0.2em\\\"></mspace><msup><mrow><mrow><mi mathvariant=\\\"normal\\\">s</mi></mrow></mrow><mrow><mo>−</mo><mn>1</mn></mrow></msup></math>. We simulate circuit architectures for integrated readout of the counter state and we evaluate the capabilities of reading out an SNSPD megapixel array that would collect up to <math display=\\\"inline\\\" overflow=\\\"scroll\\\" xmlns=\\\"http://www.w3.org/1998/Math/MathML\\\"><msup><mn>10</mn><mn>12</mn></msup></math> counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.\",\"PeriodicalId\":20109,\"journal\":{\"name\":\"Physical Review Applied\",\"volume\":\"28 1\",\"pages\":\"\"},\"PeriodicalIF\":3.8000,\"publicationDate\":\"2024-08-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Physical Review Applied\",\"FirstCategoryId\":\"101\",\"ListUrlMain\":\"https://doi.org/10.1103/physrevapplied.22.024020\",\"RegionNum\":2,\"RegionCategory\":\"物理与天体物理\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"PHYSICS, APPLIED\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Physical Review Applied","FirstCategoryId":"101","ListUrlMain":"https://doi.org/10.1103/physrevapplied.22.024020","RegionNum":2,"RegionCategory":"物理与天体物理","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"PHYSICS, APPLIED","Score":null,"Total":0}
Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays
Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. In particular, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than readout lines. Performing signal-processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrate that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires patterned on niobium nitride thin films. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an -digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof of principle, we first experimentally demonstrate the building block of the counter, an integer- frequency divider with ranging from 2 to 5. Then, we demonstrate photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a two-digit nanocryotron counter partially integrated on chip. The two-digit counter can operate in either base 2 or base 3, with a bit-error rate lower than and a count rate of . We simulate circuit architectures for integrated readout of the counter state and we evaluate the capabilities of reading out an SNSPD megapixel array that would collect up to counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.
期刊介绍:
Physical Review Applied (PRApplied) publishes high-quality papers that bridge the gap between engineering and physics, and between current and future technologies. PRApplied welcomes papers from both the engineering and physics communities, in academia and industry.
PRApplied focuses on topics including:
Biophysics, bioelectronics, and biomedical engineering,
Device physics,
Electronics,
Technology to harvest, store, and transmit energy, focusing on renewable energy technologies,
Geophysics and space science,
Industrial physics,
Magnetism and spintronics,
Metamaterials,
Microfluidics,
Nonlinear dynamics and pattern formation in natural or manufactured systems,
Nanoscience and nanotechnology,
Optics, optoelectronics, photonics, and photonic devices,
Quantum information processing, both algorithms and hardware,
Soft matter physics, including granular and complex fluids and active matter.