Color, COD, and turbidity removal from surface water by using linseed and alum coagulants: optimization through response surface methodology

This study examined the treatment of surface water using a mixed natural (linseed) and chemical (alum)-based coagulant in terms of color, turbidity, and chemical oxygen demand (COD) (%) removal in a laboratory jar test. Experimental results showed that using a combined coagulant has shown higher removal of color (99.72%) and turbidity (97.76%) at pH values of 3.5 using a 1.5 g/L dosage and a stirring time of 38.58 min. Similarly, at the same pH value and 2.5 g/L dosage, the COD removal was 96%. To determine the optimum value with the highest percent removal efficiency of the coagulation–flocculation process, several experimental parameters including blended dosage, pH, COD concentration, and initial turbidity have been studied in terms of the percent of color, chemical oxygen demand, and turbidity removal. The optimum value was found for the highest removal of color-97.75%, turbidity-96.86%, and COD-90.33% with the pH values of 7.0, at a dosage of 2.5 g/L and a stirring time of 40 min, respectively. Statistical techniques of response surface methodology were used in experimental design and optimization, in order to calculate the confidence intervals to assess population parameter precision. An ANOVA-95% confidence interval ensures that the high reliability optimizes the result. The findings proved the excellent adsorption potential and high performance of the blended coagulant in the removal of contaminants from surface water.