{"title":"电阻率、地震和磁数据的最小熵约束合作反演","authors":"","doi":"10.1016/j.jappgeo.2024.105490","DOIUrl":null,"url":null,"abstract":"<div><p>Geophysical methods are widely used to gather information about the subsurface as they are non-intrusive and comparably cheap. However, the solution to the geophysical inverse problem is inherently non-unique, which introduces considerable uncertainties. As a partial remedy to this problem, independently acquired geophysical data sets can be jointly inverted to reduce ambiguities in the resulting multi-physical subsurface images. A novel cooperative inversion approach with joint minimum entropy constraints is used to create more consistent multi-physical images with sharper boundaries with respect to the single-method inversions. Here, this approach is implemented in an open-source software and its applicability on electrical resistivity tomography (ERT), seismic refraction tomography (SRT), and magnetic data is investigated. A synthetic 2D ERT and SRT data study is used to demonstrate the approach and to investigate the influence of the governing parameters. The findings showcase the advantage of the joint minimum entropy (JME) stabilizer over separate, conventional smoothness-constrained inversions. The method is then used to analyze field data from Rockeskyller Kopf, Germany. 3D ERT and magnetic data are combined and the results confirm the expected volcanic diatreme structure with improved details. The multi-physical images of both methods are consistent in some regions, as similar boundaries are produced in the resulting models. Because of its sensitivity to hydrologic conditions in the subsurface, observations suggest that the ERT method senses different structures than the magnetic method. These structures in the ERT result do not seem to be enforced on the magnetic susceptibility distribution, showcasing the flexibility of the approach. Both investigations outline the importance of a suitable parameter and reference model selection for the performance of the approach and suggest careful parameter tests prior to the joint inversion. With proper settings, the JME inversion is a promising tool for geophysical imaging, however, this work also identifies some objectives for future studies and additional research to explore and optimize the method.</p></div>","PeriodicalId":54882,"journal":{"name":"Journal of Applied Geophysics","volume":null,"pages":null},"PeriodicalIF":2.2000,"publicationDate":"2024-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0926985124002064/pdfft?md5=2c44f9925860af5917f52dc285fe91df&pid=1-s2.0-S0926985124002064-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Minimum entropy constrained cooperative inversion of electrical resistivity, seismic and magnetic data\",\"authors\":\"\",\"doi\":\"10.1016/j.jappgeo.2024.105490\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Geophysical methods are widely used to gather information about the subsurface as they are non-intrusive and comparably cheap. However, the solution to the geophysical inverse problem is inherently non-unique, which introduces considerable uncertainties. As a partial remedy to this problem, independently acquired geophysical data sets can be jointly inverted to reduce ambiguities in the resulting multi-physical subsurface images. A novel cooperative inversion approach with joint minimum entropy constraints is used to create more consistent multi-physical images with sharper boundaries with respect to the single-method inversions. Here, this approach is implemented in an open-source software and its applicability on electrical resistivity tomography (ERT), seismic refraction tomography (SRT), and magnetic data is investigated. A synthetic 2D ERT and SRT data study is used to demonstrate the approach and to investigate the influence of the governing parameters. The findings showcase the advantage of the joint minimum entropy (JME) stabilizer over separate, conventional smoothness-constrained inversions. The method is then used to analyze field data from Rockeskyller Kopf, Germany. 3D ERT and magnetic data are combined and the results confirm the expected volcanic diatreme structure with improved details. The multi-physical images of both methods are consistent in some regions, as similar boundaries are produced in the resulting models. Because of its sensitivity to hydrologic conditions in the subsurface, observations suggest that the ERT method senses different structures than the magnetic method. These structures in the ERT result do not seem to be enforced on the magnetic susceptibility distribution, showcasing the flexibility of the approach. Both investigations outline the importance of a suitable parameter and reference model selection for the performance of the approach and suggest careful parameter tests prior to the joint inversion. With proper settings, the JME inversion is a promising tool for geophysical imaging, however, this work also identifies some objectives for future studies and additional research to explore and optimize the method.</p></div>\",\"PeriodicalId\":54882,\"journal\":{\"name\":\"Journal of Applied Geophysics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-08-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0926985124002064/pdfft?md5=2c44f9925860af5917f52dc285fe91df&pid=1-s2.0-S0926985124002064-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Applied Geophysics\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0926985124002064\",\"RegionNum\":3,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"GEOSCIENCES, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Geophysics","FirstCategoryId":"89","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0926985124002064","RegionNum":3,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"GEOSCIENCES, MULTIDISCIPLINARY","Score":null,"Total":0}
Minimum entropy constrained cooperative inversion of electrical resistivity, seismic and magnetic data
Geophysical methods are widely used to gather information about the subsurface as they are non-intrusive and comparably cheap. However, the solution to the geophysical inverse problem is inherently non-unique, which introduces considerable uncertainties. As a partial remedy to this problem, independently acquired geophysical data sets can be jointly inverted to reduce ambiguities in the resulting multi-physical subsurface images. A novel cooperative inversion approach with joint minimum entropy constraints is used to create more consistent multi-physical images with sharper boundaries with respect to the single-method inversions. Here, this approach is implemented in an open-source software and its applicability on electrical resistivity tomography (ERT), seismic refraction tomography (SRT), and magnetic data is investigated. A synthetic 2D ERT and SRT data study is used to demonstrate the approach and to investigate the influence of the governing parameters. The findings showcase the advantage of the joint minimum entropy (JME) stabilizer over separate, conventional smoothness-constrained inversions. The method is then used to analyze field data from Rockeskyller Kopf, Germany. 3D ERT and magnetic data are combined and the results confirm the expected volcanic diatreme structure with improved details. The multi-physical images of both methods are consistent in some regions, as similar boundaries are produced in the resulting models. Because of its sensitivity to hydrologic conditions in the subsurface, observations suggest that the ERT method senses different structures than the magnetic method. These structures in the ERT result do not seem to be enforced on the magnetic susceptibility distribution, showcasing the flexibility of the approach. Both investigations outline the importance of a suitable parameter and reference model selection for the performance of the approach and suggest careful parameter tests prior to the joint inversion. With proper settings, the JME inversion is a promising tool for geophysical imaging, however, this work also identifies some objectives for future studies and additional research to explore and optimize the method.
期刊介绍:
The Journal of Applied Geophysics with its key objective of responding to pertinent and timely needs, places particular emphasis on methodological developments and innovative applications of geophysical techniques for addressing environmental, engineering, and hydrological problems. Related topical research in exploration geophysics and in soil and rock physics is also covered by the Journal of Applied Geophysics.