CRAFT NNBI 低温泵的模拟和实验

IF 1.9 3区 工程技术 Q1 NUCLEAR SCIENCE & TECHNOLOGY Fusion Engineering and Design Pub Date : 2024-08-30 DOI:10.1016/j.fusengdes.2024.114637
{"title":"CRAFT NNBI 低温泵的模拟和实验","authors":"","doi":"10.1016/j.fusengdes.2024.114637","DOIUrl":null,"url":null,"abstract":"<div><p>The cryogenic vacuum system is an important subsystem of Comprehensive Research Facility for Fusion Technology Negative Neutral Beam Injector, which provides vacuum environment support for various experiments related to the beam generation and transport process. In the paper, a simulation and experimental study of the Comprehensive Research Facility for Fusion Reactor Negative Neutral Beam Injector (CRAFT NNBI) cryopump performance has been carried out. The Beam Line Vessel (BLV) and its components are modeled by Solidworks, the pressure distribution, gas molecular velocity distribution and adsorption uniformity of the crysorption pump in the BLV are analyzed by simulation using the Molflow software, at the same time, the performance of the south cryopump is tested experimentally using in-situ measurement method. The simulation results show that the average pressure near the Neutralizer is 8.5*10<sup>-3</sup> Pa, the average pressure near the Electrical Residual Ion Dump (ERID) is 8*10<sup>-3</sup> Pa, and the average pressure near the Calorimeter is 9*10<sup>-3</sup> Pa. The adsorption percentage fluctuates around 12%, which indicates that single structure plays the function of adsorption efficiently, the theoretical pumping speed of the south cryopump on H2 was calculated to be 7.34*10<sup>5</sup> L/s, total theoretical pumping speed of two cryopumps can reach 3.67*10<sup>6</sup> L/s. The experimental results showed that when the south cryopump was operation, the pressures near the Neutralizer were 2.8*10<sup>-2</sup> Pa, the pressures near the ERID were 2.7*10<sup>-2</sup> Pa, and the pressures near the Calorimeter were 7*10<sup>-3</sup> Pa, the actual pumping speed of the south cryopump on H2 was 6.37*10<sup>5</sup> L/s, total actual pumping speed of two cryopumps can reach 3.1*10<sup>6</sup> L/s.</p></div>","PeriodicalId":55133,"journal":{"name":"Fusion Engineering and Design","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2024-08-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Simulation and experiment of CRAFT NNBI cryopump\",\"authors\":\"\",\"doi\":\"10.1016/j.fusengdes.2024.114637\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The cryogenic vacuum system is an important subsystem of Comprehensive Research Facility for Fusion Technology Negative Neutral Beam Injector, which provides vacuum environment support for various experiments related to the beam generation and transport process. In the paper, a simulation and experimental study of the Comprehensive Research Facility for Fusion Reactor Negative Neutral Beam Injector (CRAFT NNBI) cryopump performance has been carried out. The Beam Line Vessel (BLV) and its components are modeled by Solidworks, the pressure distribution, gas molecular velocity distribution and adsorption uniformity of the crysorption pump in the BLV are analyzed by simulation using the Molflow software, at the same time, the performance of the south cryopump is tested experimentally using in-situ measurement method. The simulation results show that the average pressure near the Neutralizer is 8.5*10<sup>-3</sup> Pa, the average pressure near the Electrical Residual Ion Dump (ERID) is 8*10<sup>-3</sup> Pa, and the average pressure near the Calorimeter is 9*10<sup>-3</sup> Pa. The adsorption percentage fluctuates around 12%, which indicates that single structure plays the function of adsorption efficiently, the theoretical pumping speed of the south cryopump on H2 was calculated to be 7.34*10<sup>5</sup> L/s, total theoretical pumping speed of two cryopumps can reach 3.67*10<sup>6</sup> L/s. The experimental results showed that when the south cryopump was operation, the pressures near the Neutralizer were 2.8*10<sup>-2</sup> Pa, the pressures near the ERID were 2.7*10<sup>-2</sup> Pa, and the pressures near the Calorimeter were 7*10<sup>-3</sup> Pa, the actual pumping speed of the south cryopump on H2 was 6.37*10<sup>5</sup> L/s, total actual pumping speed of two cryopumps can reach 3.1*10<sup>6</sup> L/s.</p></div>\",\"PeriodicalId\":55133,\"journal\":{\"name\":\"Fusion Engineering and Design\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2024-08-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Fusion Engineering and Design\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0920379624004885\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"NUCLEAR SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Fusion Engineering and Design","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0920379624004885","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

摘要

低温真空系统是聚变技术负中性束注入器综合研究设施的一个重要子系统,为各种与束流产生和传输过程相关的实验提供真空环境支持。本文对聚变反应堆负中性束注入器综合研究设施(CRAFT NNBI)低温泵的性能进行了模拟和实验研究。利用 Solidworks 对束线容器(BLV)及其组件进行建模,并使用 Molflow 软件对束线容器内的压力分布、气体分子速度分布以及低温泵的吸附均匀性进行了仿真分析,同时采用原位测量方法对南低温泵的性能进行了实验测试。模拟结果表明,中和器附近的平均压力为 8.5*10-3 Pa,电残余离子泵(ERID)附近的平均压力为 8*10-3 Pa,量热计附近的平均压力为 9*10-3 Pa。经计算,南侧低温泵对 H2 的理论抽速为 7.34*105 L/s,两个低温泵的总理论抽速可达 3.67*106 L/s。实验结果表明,当南侧低温泵工作时,中和器附近的压力为 2.8*10-2 Pa,ERID 附近的压力为 2.7*10-2 Pa,量热计附近的压力为 7*10-3 Pa,南侧低温泵对 H2 的实际抽速为 6.37*105 L/s,两个低温泵的总实际抽速可达 3.1*106 L/s。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Simulation and experiment of CRAFT NNBI cryopump

The cryogenic vacuum system is an important subsystem of Comprehensive Research Facility for Fusion Technology Negative Neutral Beam Injector, which provides vacuum environment support for various experiments related to the beam generation and transport process. In the paper, a simulation and experimental study of the Comprehensive Research Facility for Fusion Reactor Negative Neutral Beam Injector (CRAFT NNBI) cryopump performance has been carried out. The Beam Line Vessel (BLV) and its components are modeled by Solidworks, the pressure distribution, gas molecular velocity distribution and adsorption uniformity of the crysorption pump in the BLV are analyzed by simulation using the Molflow software, at the same time, the performance of the south cryopump is tested experimentally using in-situ measurement method. The simulation results show that the average pressure near the Neutralizer is 8.5*10-3 Pa, the average pressure near the Electrical Residual Ion Dump (ERID) is 8*10-3 Pa, and the average pressure near the Calorimeter is 9*10-3 Pa. The adsorption percentage fluctuates around 12%, which indicates that single structure plays the function of adsorption efficiently, the theoretical pumping speed of the south cryopump on H2 was calculated to be 7.34*105 L/s, total theoretical pumping speed of two cryopumps can reach 3.67*106 L/s. The experimental results showed that when the south cryopump was operation, the pressures near the Neutralizer were 2.8*10-2 Pa, the pressures near the ERID were 2.7*10-2 Pa, and the pressures near the Calorimeter were 7*10-3 Pa, the actual pumping speed of the south cryopump on H2 was 6.37*105 L/s, total actual pumping speed of two cryopumps can reach 3.1*106 L/s.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Fusion Engineering and Design
Fusion Engineering and Design 工程技术-核科学技术
CiteScore
3.50
自引率
23.50%
发文量
275
审稿时长
3.8 months
期刊介绍: The journal accepts papers about experiments (both plasma and technology), theory, models, methods, and designs in areas relating to technology, engineering, and applied science aspects of magnetic and inertial fusion energy. Specific areas of interest include: MFE and IFE design studies for experiments and reactors; fusion nuclear technologies and materials, including blankets and shields; analysis of reactor plasmas; plasma heating, fuelling, and vacuum systems; drivers, targets, and special technologies for IFE, controls and diagnostics; fuel cycle analysis and tritium reprocessing and handling; operations and remote maintenance of reactors; safety, decommissioning, and waste management; economic and environmental analysis of components and systems.
期刊最新文献
On the fabrication of ultrafine-grained potassium-doped tungsten: Mechanical milling and spark plasma sintering of K-doped W powder prepared by evaporation-condensation method X-ray imaging crystal spectrometer (XICS) diagnostic on the HL-3 tokamak The energy output equilibrium scheme with intermediate energy storage for tokamak fusion power plant Measurement of the mechanical vibration and its impact on the magnetic diagnostics in the J-TEXT tokamak Overview of the TCV digital real-time plasma control system and its applications
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1