Quantitative analysis of soil quality around brick kilns using pollution indices and ANOVA in Jammu district of Jammu and Kashmir, India

The study investigated soil quality around brick kilns in the Jammu district of Jammu and Kashmir, analyzing 200 samples from 50 sites for selected parameters such as pH, electrical conductiv1ity, soil temperature, organic carbon content, organic matter, macronutrients, and heavy metals. The findings revealed that soil electrical conductivity ranged from 0.33 to 0.63 dS/m, with significant differences observed at varying distances from the kilns. Copper concentrations were highest at 5.32 mg/kg near the kilns, while iron and lead levels also varied significantly, indicating potential contamination. The mean soil temperature was recorded to be 27.69°C.The pH values ranged from 6.5 to 7.8, and the average pH of 8.22 indicated the slightly alkaline nature of the soil around the brick kilns. The organic carbon ranged from 0.34% to 1.02%.Soil temperature and electrical conductivity decreased with increasing distance from the kilns, with temperature showing positive correlations with organic carbon, organic matter, nitrogen, potassium, manganese, and iron and negative correlations with pH, phosphorus, zinc, copper, lead, and cadmium. A perfect positive correlation was noted among nitrogen, organic carbon, and organic matter. Heavy metals, except for zinc and manganese, showed positive correlations with each other. The average Zn, Cu, Mn, Fe, Pb and Cd concentration was recorded as 1.07, 1.03, 6.71, 10.30, 37.04 and 1.91 ppm, respectively. The contamination factor indicated moderate contamination with lead and cadmium, while the geo-accumulation index also suggested moderate contamination. The pollution load index reflected unpolluted soil and enrichment factor values for heavy metals ranked as Cd > Pb > Cu > Zn > Mn > Fe.ANOVA results revealed significant variations in electrical conductivity, copper, iron, and lead, underscoring the potential environmental impacts at different distances from the kilns. However, no significant differences were found between agricultural and non-agricultural sites in other physicochemical parameters. These variations highlight the considerable impact of brick kilns on soil health, emphasizing the need for enhanced environmental management and further research to mitigate these effects.