V. V. Toporovsky, V. V. Samarkin, A. V. Kudryashov, I. V. Galaktionov, A. A. Panich, A. Yu. Malykhin
{"title":"控制元件横截面积减小时压电陶瓷梳的冲程模拟与测量","authors":"V. V. Toporovsky, V. V. Samarkin, A. V. Kudryashov, I. V. Galaktionov, A. A. Panich, A. Yu. Malykhin","doi":"10.1134/S0030400X24040179","DOIUrl":null,"url":null,"abstract":"<p>Numerical modeling of multilayer piezoactuators with a cross-sectional area of 2 × 2 mm was carried out. It was shown that when interdigitated switching is used in piezoactuators, a local redistribution of transverse strain maxima is observed, which leads to a decrease in the mechanical strength and reliability of control elements. Piezoceramic combs with identical linear dimensions were produced and the mechanical and electrical properties of the developed elements were measured. It was revealed that stroke at a control voltage of 300 V decreases from 4 to 1.5 μm when using the interdigitated switching method in comparison with multilayer actuators of larger cross-section due to a decrease in the effective polarization area of piezoactuators. Piezoceramic combs with wire commutation were manufactured, where the displacement at a control voltage of 300 V was 4.6–4.8 μm.</p>","PeriodicalId":723,"journal":{"name":"Optics and Spectroscopy","volume":"132 4","pages":"421 - 425"},"PeriodicalIF":0.8000,"publicationDate":"2024-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Simulation and Measurement of Stroke in Piezoceramic Combs with a Decrease in Cross-Sectional Area of Control Elements\",\"authors\":\"V. V. Toporovsky, V. V. Samarkin, A. V. Kudryashov, I. V. Galaktionov, A. A. Panich, A. Yu. Malykhin\",\"doi\":\"10.1134/S0030400X24040179\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>Numerical modeling of multilayer piezoactuators with a cross-sectional area of 2 × 2 mm was carried out. It was shown that when interdigitated switching is used in piezoactuators, a local redistribution of transverse strain maxima is observed, which leads to a decrease in the mechanical strength and reliability of control elements. Piezoceramic combs with identical linear dimensions were produced and the mechanical and electrical properties of the developed elements were measured. It was revealed that stroke at a control voltage of 300 V decreases from 4 to 1.5 μm when using the interdigitated switching method in comparison with multilayer actuators of larger cross-section due to a decrease in the effective polarization area of piezoactuators. Piezoceramic combs with wire commutation were manufactured, where the displacement at a control voltage of 300 V was 4.6–4.8 μm.</p>\",\"PeriodicalId\":723,\"journal\":{\"name\":\"Optics and Spectroscopy\",\"volume\":\"132 4\",\"pages\":\"421 - 425\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2024-09-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Optics and Spectroscopy\",\"FirstCategoryId\":\"101\",\"ListUrlMain\":\"https://link.springer.com/article/10.1134/S0030400X24040179\",\"RegionNum\":4,\"RegionCategory\":\"物理与天体物理\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"OPTICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Optics and Spectroscopy","FirstCategoryId":"101","ListUrlMain":"https://link.springer.com/article/10.1134/S0030400X24040179","RegionNum":4,"RegionCategory":"物理与天体物理","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"OPTICS","Score":null,"Total":0}
引用次数: 0
摘要
摘要 对横截面积为 2 × 2 毫米的多层压电致动器进行了数值建模。研究表明，在压电致动器中使用间隙开关时，会观察到横向应变最大值的局部重新分布，从而导致控制元件的机械强度和可靠性降低。我们制作了具有相同线性尺寸的压电陶瓷梳，并测量了所开发元件的机械和电气性能。结果表明，与横截面较大的多层致动器相比，在控制电压为 300 V 时，由于压电致动器的有效极化面积减小，使用间隙开关方法的行程从 4 μm 减小到 1.5 μm。制造出的带导线换向的压电陶瓷梳，在 300 V 控制电压下的位移为 4.6-4.8 μm。
Simulation and Measurement of Stroke in Piezoceramic Combs with a Decrease in Cross-Sectional Area of Control Elements
Numerical modeling of multilayer piezoactuators with a cross-sectional area of 2 × 2 mm was carried out. It was shown that when interdigitated switching is used in piezoactuators, a local redistribution of transverse strain maxima is observed, which leads to a decrease in the mechanical strength and reliability of control elements. Piezoceramic combs with identical linear dimensions were produced and the mechanical and electrical properties of the developed elements were measured. It was revealed that stroke at a control voltage of 300 V decreases from 4 to 1.5 μm when using the interdigitated switching method in comparison with multilayer actuators of larger cross-section due to a decrease in the effective polarization area of piezoactuators. Piezoceramic combs with wire commutation were manufactured, where the displacement at a control voltage of 300 V was 4.6–4.8 μm.
期刊介绍：
Optics and Spectroscopy (Optika i spektroskopiya), founded in 1956, presents original and review papers in various fields of modern optics and spectroscopy in the entire wavelength range from radio waves to X-rays. Topics covered include problems of theoretical and experimental spectroscopy of atoms, molecules, and condensed state, lasers and the interaction of laser radiation with matter, physical and geometrical optics, holography, and physical principles of optical instrument making.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
