{"title":"基于液滴沉积建模的三维打印技术实现阴道内环的个性化定制","authors":"","doi":"10.1016/j.ijpharm.2024.124754","DOIUrl":null,"url":null,"abstract":"<div><div>Intravaginal rings (IVRs) are long-acting drug device systems designed for controlled drug release in the vagina. Commercially available IVRs employ a one-size-fits-all development approach, where all patients receive the same drug in similar doses and frequencies, allowing no space for dosage individualization for specific patients’ needs. To allow flexibility for dosage individualization, this study explores the impact of infill-density on critical characteristics of personalized IVRs, manufactured using droplet deposition modeling three-dimensional (3D) printing technology. The model drug was dispersed on the surface of thermoplastic polyurethane pellets using an oil coating method. IVR infill-density ranged from 60 to 100 %. The compatibility of the drug and matrix was assessed using thermal and spectroscopic analyses. The IVRs were evaluated for weight, porosity, surface morphology, mechanical properties, and in vitro drug release. The results demonstrated high dimensional accuracy and uniformity of 3D-printed IVRs, indicating the robustness of the printing process. Increasing infill-density resulted in greater weight, storage modulus, Young’s modulus, Shore hardness, and compression strength, while reducing the porosity of IVRs. All IVRs showed a controlled drug release pattern when tested under accelerated conditions of temperature for 25 days. Notably, greater infill-densities were associated with a decrease in the percentage of drug released. Overall, the study demonstrated that infill-density was an important parameter for personalizing the critical characteristics of the 3D-printed IVRs to fit individual patient needs.</div></div>","PeriodicalId":14187,"journal":{"name":"International Journal of Pharmaceutics","volume":null,"pages":null},"PeriodicalIF":5.3000,"publicationDate":"2024-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Personalization of Intravaginal rings by droplet deposition modeling based 3D printing technology\",\"authors\":\"\",\"doi\":\"10.1016/j.ijpharm.2024.124754\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Intravaginal rings (IVRs) are long-acting drug device systems designed for controlled drug release in the vagina. Commercially available IVRs employ a one-size-fits-all development approach, where all patients receive the same drug in similar doses and frequencies, allowing no space for dosage individualization for specific patients’ needs. To allow flexibility for dosage individualization, this study explores the impact of infill-density on critical characteristics of personalized IVRs, manufactured using droplet deposition modeling three-dimensional (3D) printing technology. The model drug was dispersed on the surface of thermoplastic polyurethane pellets using an oil coating method. IVR infill-density ranged from 60 to 100 %. The compatibility of the drug and matrix was assessed using thermal and spectroscopic analyses. The IVRs were evaluated for weight, porosity, surface morphology, mechanical properties, and in vitro drug release. The results demonstrated high dimensional accuracy and uniformity of 3D-printed IVRs, indicating the robustness of the printing process. Increasing infill-density resulted in greater weight, storage modulus, Young’s modulus, Shore hardness, and compression strength, while reducing the porosity of IVRs. All IVRs showed a controlled drug release pattern when tested under accelerated conditions of temperature for 25 days. Notably, greater infill-densities were associated with a decrease in the percentage of drug released. Overall, the study demonstrated that infill-density was an important parameter for personalizing the critical characteristics of the 3D-printed IVRs to fit individual patient needs.</div></div>\",\"PeriodicalId\":14187,\"journal\":{\"name\":\"International Journal of Pharmaceutics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.3000,\"publicationDate\":\"2024-09-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Pharmaceutics\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0378517324009888\",\"RegionNum\":2,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"PHARMACOLOGY & PHARMACY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Pharmaceutics","FirstCategoryId":"3","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0378517324009888","RegionNum":2,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"PHARMACOLOGY & PHARMACY","Score":null,"Total":0}
Personalization of Intravaginal rings by droplet deposition modeling based 3D printing technology
Intravaginal rings (IVRs) are long-acting drug device systems designed for controlled drug release in the vagina. Commercially available IVRs employ a one-size-fits-all development approach, where all patients receive the same drug in similar doses and frequencies, allowing no space for dosage individualization for specific patients’ needs. To allow flexibility for dosage individualization, this study explores the impact of infill-density on critical characteristics of personalized IVRs, manufactured using droplet deposition modeling three-dimensional (3D) printing technology. The model drug was dispersed on the surface of thermoplastic polyurethane pellets using an oil coating method. IVR infill-density ranged from 60 to 100 %. The compatibility of the drug and matrix was assessed using thermal and spectroscopic analyses. The IVRs were evaluated for weight, porosity, surface morphology, mechanical properties, and in vitro drug release. The results demonstrated high dimensional accuracy and uniformity of 3D-printed IVRs, indicating the robustness of the printing process. Increasing infill-density resulted in greater weight, storage modulus, Young’s modulus, Shore hardness, and compression strength, while reducing the porosity of IVRs. All IVRs showed a controlled drug release pattern when tested under accelerated conditions of temperature for 25 days. Notably, greater infill-densities were associated with a decrease in the percentage of drug released. Overall, the study demonstrated that infill-density was an important parameter for personalizing the critical characteristics of the 3D-printed IVRs to fit individual patient needs.
期刊介绍:
The International Journal of Pharmaceutics is the third most cited journal in the "Pharmacy & Pharmacology" category out of 366 journals, being the true home for pharmaceutical scientists concerned with the physical, chemical and biological properties of devices and delivery systems for drugs, vaccines and biologicals, including their design, manufacture and evaluation. This includes evaluation of the properties of drugs, excipients such as surfactants and polymers and novel materials. The journal has special sections on pharmaceutical nanotechnology and personalized medicines, and publishes research papers, reviews, commentaries and letters to the editor as well as special issues.