{"title":"利用磁性固相萃取法合成由二氧化硅修饰的 Fe3O4 纳米颗粒和多巴胺组成的纳米吸附剂,去除和测量水样中的痕量罗丹明 B。","authors":"Abdollah Yari, Mariam Salemzadeh","doi":"10.1039/d4ay01537a","DOIUrl":null,"url":null,"abstract":"<p><p>Rhodamine B (RDB) dye is generally toxic and causes problems such as carcinogenic activities, neurological disorders, and respiratory tract irritations. However, some individuals still illegally use RDB as a food additive. Therefore, a simple and accurate method is needed to determine RDB in real samples such as food or cosmetic products. In this study, the magnetic solid phase extraction (MSPE) method was used to measure very low amounts of RDB dye in water samples. The advantages of this method include simplicity, good repeatability, high preconcentration factor, higher extraction efficiency, low organic solvent volume requirement, rapid separation, low cost, high sensitivity, and interference removal compared to other methods. Within this approach, iron oxide nanoparticles were synthesised, followed by the application of tetra ethoxy silane (TEOS) and polydopamine (PDA) coatings on the nanoparticle surface, resulting in the creation of the Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>@PDA nano-sorbent. This nano-sorbent was then utilized as the magnetic solid phase in MSPE. The characteristics of the synthesized compounds were investigated by various methods such as infrared Fourier transform spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and vibrating sample magnetometry (VSM). Response surface methodology (RSM) and Box-Behnken (BB) design were used to optimize the variables affecting the adsorption process and achieved high recovery percentages. Under optimal experimental conditions, the detection limit and quantification limit of the method were found to be 0.73 and 2.42 μg L<sup>-1</sup> for RDB, respectively, with RSDs of ±0.32% and ±0.67%. Furthermore, the linear concentration range of the proposed method for solid phase extraction of RDB was determined to be 10.0-900.0 μg L<sup>-1</sup>. Moreover, the recovery rates for tap water, lake water, and well water samples ranged from 96.9% to 98.6%.</p>","PeriodicalId":64,"journal":{"name":"Analytical Methods","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2024-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Removal and measurement of trace amounts of rhodamine B in aqueous samples based on the synthesis of a nanosorbent composed of Fe<sub>3</sub>O<sub>4</sub> nanoparticles modified with SiO<sub>2</sub> and polydopamine by magnetic solid phase extraction.\",\"authors\":\"Abdollah Yari, Mariam Salemzadeh\",\"doi\":\"10.1039/d4ay01537a\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Rhodamine B (RDB) dye is generally toxic and causes problems such as carcinogenic activities, neurological disorders, and respiratory tract irritations. However, some individuals still illegally use RDB as a food additive. Therefore, a simple and accurate method is needed to determine RDB in real samples such as food or cosmetic products. In this study, the magnetic solid phase extraction (MSPE) method was used to measure very low amounts of RDB dye in water samples. The advantages of this method include simplicity, good repeatability, high preconcentration factor, higher extraction efficiency, low organic solvent volume requirement, rapid separation, low cost, high sensitivity, and interference removal compared to other methods. Within this approach, iron oxide nanoparticles were synthesised, followed by the application of tetra ethoxy silane (TEOS) and polydopamine (PDA) coatings on the nanoparticle surface, resulting in the creation of the Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>@PDA nano-sorbent. This nano-sorbent was then utilized as the magnetic solid phase in MSPE. The characteristics of the synthesized compounds were investigated by various methods such as infrared Fourier transform spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and vibrating sample magnetometry (VSM). Response surface methodology (RSM) and Box-Behnken (BB) design were used to optimize the variables affecting the adsorption process and achieved high recovery percentages. Under optimal experimental conditions, the detection limit and quantification limit of the method were found to be 0.73 and 2.42 μg L<sup>-1</sup> for RDB, respectively, with RSDs of ±0.32% and ±0.67%. Furthermore, the linear concentration range of the proposed method for solid phase extraction of RDB was determined to be 10.0-900.0 μg L<sup>-1</sup>. Moreover, the recovery rates for tap water, lake water, and well water samples ranged from 96.9% to 98.6%.</p>\",\"PeriodicalId\":64,\"journal\":{\"name\":\"Analytical Methods\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2024-10-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Analytical Methods\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://doi.org/10.1039/d4ay01537a\",\"RegionNum\":3,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, ANALYTICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Analytical Methods","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1039/d4ay01537a","RegionNum":3,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
Removal and measurement of trace amounts of rhodamine B in aqueous samples based on the synthesis of a nanosorbent composed of Fe3O4 nanoparticles modified with SiO2 and polydopamine by magnetic solid phase extraction.
Rhodamine B (RDB) dye is generally toxic and causes problems such as carcinogenic activities, neurological disorders, and respiratory tract irritations. However, some individuals still illegally use RDB as a food additive. Therefore, a simple and accurate method is needed to determine RDB in real samples such as food or cosmetic products. In this study, the magnetic solid phase extraction (MSPE) method was used to measure very low amounts of RDB dye in water samples. The advantages of this method include simplicity, good repeatability, high preconcentration factor, higher extraction efficiency, low organic solvent volume requirement, rapid separation, low cost, high sensitivity, and interference removal compared to other methods. Within this approach, iron oxide nanoparticles were synthesised, followed by the application of tetra ethoxy silane (TEOS) and polydopamine (PDA) coatings on the nanoparticle surface, resulting in the creation of the Fe3O4@SiO2@PDA nano-sorbent. This nano-sorbent was then utilized as the magnetic solid phase in MSPE. The characteristics of the synthesized compounds were investigated by various methods such as infrared Fourier transform spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and vibrating sample magnetometry (VSM). Response surface methodology (RSM) and Box-Behnken (BB) design were used to optimize the variables affecting the adsorption process and achieved high recovery percentages. Under optimal experimental conditions, the detection limit and quantification limit of the method were found to be 0.73 and 2.42 μg L-1 for RDB, respectively, with RSDs of ±0.32% and ±0.67%. Furthermore, the linear concentration range of the proposed method for solid phase extraction of RDB was determined to be 10.0-900.0 μg L-1. Moreover, the recovery rates for tap water, lake water, and well water samples ranged from 96.9% to 98.6%.