Direct runoff hydrograph model’s collation for a Pakistan’s region

Rainfall-Runoff modeling is among the classical applications of hydrology. This paper examines the results of 3 hydrologic approaches, particularly Clark Model, Nash Model, and Geomorphic Instantaneous Unit Hydrograph Model. Assumptions are forwarded for the long run use of the Rawalpindi Division, Pakistan’s Small Dam Organization. The catchment of Shahpur Dam was an area under consideration for the study. The Digital elevation model (DEM) was implicated to measure the Nash and Clark model’s geomorphic parameters. Using ArcGIS, catchment satellite imagery was processed to estimate geomorphological parameters. The models have been applied to multiple storm cases. Geographic Instantaneous Unit Hydrograph (GIUH) model gave direct surface runoff hydrograph, whereas, on measured precipitation excess rainfall hyetograph was obtained. Four types of statistical parameters, namely efficiency of the model (EFF), percentage defect in time to attain peak (PETP), percent defect in attained peak Q (PEP), percentage defect in runoff rate (PEV) are used to check model’s efficiency. The comparison is done between the findings of Clark and Nash GIUH models and the original Clark and Nash models. It was observed that GIUH models are equally good even when optimization is done for Clark and Nash model’s parameters. Since the results obtained from these models are more credible, so, these models can be used in ungauged catchments to estimate the hydrographs.