{"title":"用TINA软件模拟相位计","authors":"A. J. Chaudhari, R. Waghulade","doi":"10.4314/mejs.v10i1.4","DOIUrl":null,"url":null,"abstract":"The use of a circuit simulator is more and more crucial in designing electrical and electronic gadgets. This technique makes it possible to obtain results when the hardware is unavailable or very costly. Simulations are widely used in the industry hence it is necessary to use it astutely. Authors tried to study an important concept about “Squaring a Signal” and further it is extended to design and simulation of phase meter. Squaring a sinusoidal lead doubling its frequency and adding the dc component. In this study squaring sine wave with frequency of 5KHz gives a negative cosine wave with frequency 10KHz along with a dc term of 2V. TINA software is used for this study. TINA software has ability to perform DC analysis, AC analysis and transient analysis. Transient analysis calculates the circuit response to various input waveforms. Results are analyzed using transient analysis for sinusoidal input. Keywords : TINA, Simulation, Multipliers, Virtual instruments, Transient analysis, Phase.","PeriodicalId":18948,"journal":{"name":"Momona Ethiopian Journal of Science","volume":null,"pages":null},"PeriodicalIF":0.3000,"publicationDate":"2018-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.4314/mejs.v10i1.4","citationCount":"1","resultStr":"{\"title\":\"Simulation of Phase Meter using TINA Software\",\"authors\":\"A. J. Chaudhari, R. Waghulade\",\"doi\":\"10.4314/mejs.v10i1.4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The use of a circuit simulator is more and more crucial in designing electrical and electronic gadgets. This technique makes it possible to obtain results when the hardware is unavailable or very costly. Simulations are widely used in the industry hence it is necessary to use it astutely. Authors tried to study an important concept about “Squaring a Signal” and further it is extended to design and simulation of phase meter. Squaring a sinusoidal lead doubling its frequency and adding the dc component. In this study squaring sine wave with frequency of 5KHz gives a negative cosine wave with frequency 10KHz along with a dc term of 2V. TINA software is used for this study. TINA software has ability to perform DC analysis, AC analysis and transient analysis. Transient analysis calculates the circuit response to various input waveforms. Results are analyzed using transient analysis for sinusoidal input. Keywords : TINA, Simulation, Multipliers, Virtual instruments, Transient analysis, Phase.\",\"PeriodicalId\":18948,\"journal\":{\"name\":\"Momona Ethiopian Journal of Science\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.3000,\"publicationDate\":\"2018-05-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.4314/mejs.v10i1.4\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Momona Ethiopian Journal of Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4314/mejs.v10i1.4\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MULTIDISCIPLINARY SCIENCES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Momona Ethiopian Journal of Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4314/mejs.v10i1.4","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MULTIDISCIPLINARY SCIENCES","Score":null,"Total":0}
引用次数: 1
摘要
电路模拟器的使用在设计电气和电子产品时越来越重要。这种技术使得在硬件不可用或非常昂贵时可以获得结果。模拟在工业中被广泛使用,因此有必要巧妙地使用它。作者试图研究“Squaring a Signal”的一个重要概念,并将其扩展到相位计的设计和仿真中。对正弦引线进行平方,使其频率加倍,并添加直流分量。在本研究中,将频率为5KHz的正弦波平方,得到频率为10KHz的负余弦波,直流项为2V。TINA软件用于本研究。TINA软件具有进行直流分析、交流分析和瞬态分析的能力。瞬态分析计算电路对各种输入波形的响应。使用正弦输入的瞬态分析来分析结果。关键词:TINA,仿真,乘法器,虚拟仪器,瞬态分析,相位。
The use of a circuit simulator is more and more crucial in designing electrical and electronic gadgets. This technique makes it possible to obtain results when the hardware is unavailable or very costly. Simulations are widely used in the industry hence it is necessary to use it astutely. Authors tried to study an important concept about “Squaring a Signal” and further it is extended to design and simulation of phase meter. Squaring a sinusoidal lead doubling its frequency and adding the dc component. In this study squaring sine wave with frequency of 5KHz gives a negative cosine wave with frequency 10KHz along with a dc term of 2V. TINA software is used for this study. TINA software has ability to perform DC analysis, AC analysis and transient analysis. Transient analysis calculates the circuit response to various input waveforms. Results are analyzed using transient analysis for sinusoidal input. Keywords : TINA, Simulation, Multipliers, Virtual instruments, Transient analysis, Phase.