{"title":"舵横摇稳定的状态空间建模方法","authors":"B. Shameem, V. Vincent","doi":"10.3329/JNAME.V15I2.36322","DOIUrl":null,"url":null,"abstract":"The control objective of the Rudder Roll Stabilization (RRS) system is to deploy the rudder, which is primarily a path controlling device, to reduce the roll motion without interference in heading of ship. To achieve the control of both roll and yaw motions, the only control input is the rudder angle and hence the RRS system is referred as a Single Input, Two Output (SITO) system. Rudder roll stabilization is insignificant at low forward speed of the ship, but can give significant control at higher speed when fast rudder movement is applied. This paper presents a closed loop state space model for accurate simulations on rudder roll stabilization in irregular seas considering the 3-degree of freedom motions, i.e., sway, roll and yaw. The computational model is developed to analyze the effect of the rudder movement on sway, roll and yaw in forward speed conditions in irregular sea conditions. The Sea State conditions are modelled as wave perturbation models using the method of shaping filter established by filtered white noise. The control system has been designed using optimal linear quadratic regulator (LQR) method. The control loop contains both the signal for the autopilot action to trigger the heading angle correction as well as the signal for rudder based roll motion control. The simulations are carried out with rudder roll control system ON and OFF mode to analyze the effect of the rudder on steering and motion stabilization. In both cases the autopilot is in active mode to correct deviations in the course heading. The simulations are analyzed for three different ship speeds in two different Seas State conditions with a low and fast rudder movement to show the efficacy of the model. The performance is evaluated and presented based on the RMS value. Since the rudder based roll motion stabilization may also result in unnecessary motions of sway and yaw, besides the desirable roll reduction, the result presents the sway-roll-yaw responses as applicable under the particular speed and Sea State conditions.","PeriodicalId":1,"journal":{"name":"Accounts of Chemical Research","volume":null,"pages":null},"PeriodicalIF":16.4000,"publicationDate":"2018-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3329/JNAME.V15I2.36322","citationCount":"1","resultStr":"{\"title\":\"State space modelling approach for rudder roll stabilization\",\"authors\":\"B. Shameem, V. Vincent\",\"doi\":\"10.3329/JNAME.V15I2.36322\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The control objective of the Rudder Roll Stabilization (RRS) system is to deploy the rudder, which is primarily a path controlling device, to reduce the roll motion without interference in heading of ship. To achieve the control of both roll and yaw motions, the only control input is the rudder angle and hence the RRS system is referred as a Single Input, Two Output (SITO) system. Rudder roll stabilization is insignificant at low forward speed of the ship, but can give significant control at higher speed when fast rudder movement is applied. This paper presents a closed loop state space model for accurate simulations on rudder roll stabilization in irregular seas considering the 3-degree of freedom motions, i.e., sway, roll and yaw. The computational model is developed to analyze the effect of the rudder movement on sway, roll and yaw in forward speed conditions in irregular sea conditions. The Sea State conditions are modelled as wave perturbation models using the method of shaping filter established by filtered white noise. The control system has been designed using optimal linear quadratic regulator (LQR) method. The control loop contains both the signal for the autopilot action to trigger the heading angle correction as well as the signal for rudder based roll motion control. The simulations are carried out with rudder roll control system ON and OFF mode to analyze the effect of the rudder on steering and motion stabilization. In both cases the autopilot is in active mode to correct deviations in the course heading. The simulations are analyzed for three different ship speeds in two different Seas State conditions with a low and fast rudder movement to show the efficacy of the model. The performance is evaluated and presented based on the RMS value. Since the rudder based roll motion stabilization may also result in unnecessary motions of sway and yaw, besides the desirable roll reduction, the result presents the sway-roll-yaw responses as applicable under the particular speed and Sea State conditions.\",\"PeriodicalId\":1,\"journal\":{\"name\":\"Accounts of Chemical Research\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":16.4000,\"publicationDate\":\"2018-12-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.3329/JNAME.V15I2.36322\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Accounts of Chemical Research\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3329/JNAME.V15I2.36322\",\"RegionNum\":1,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Accounts of Chemical Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3329/JNAME.V15I2.36322","RegionNum":1,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
State space modelling approach for rudder roll stabilization
The control objective of the Rudder Roll Stabilization (RRS) system is to deploy the rudder, which is primarily a path controlling device, to reduce the roll motion without interference in heading of ship. To achieve the control of both roll and yaw motions, the only control input is the rudder angle and hence the RRS system is referred as a Single Input, Two Output (SITO) system. Rudder roll stabilization is insignificant at low forward speed of the ship, but can give significant control at higher speed when fast rudder movement is applied. This paper presents a closed loop state space model for accurate simulations on rudder roll stabilization in irregular seas considering the 3-degree of freedom motions, i.e., sway, roll and yaw. The computational model is developed to analyze the effect of the rudder movement on sway, roll and yaw in forward speed conditions in irregular sea conditions. The Sea State conditions are modelled as wave perturbation models using the method of shaping filter established by filtered white noise. The control system has been designed using optimal linear quadratic regulator (LQR) method. The control loop contains both the signal for the autopilot action to trigger the heading angle correction as well as the signal for rudder based roll motion control. The simulations are carried out with rudder roll control system ON and OFF mode to analyze the effect of the rudder on steering and motion stabilization. In both cases the autopilot is in active mode to correct deviations in the course heading. The simulations are analyzed for three different ship speeds in two different Seas State conditions with a low and fast rudder movement to show the efficacy of the model. The performance is evaluated and presented based on the RMS value. Since the rudder based roll motion stabilization may also result in unnecessary motions of sway and yaw, besides the desirable roll reduction, the result presents the sway-roll-yaw responses as applicable under the particular speed and Sea State conditions.
期刊介绍:
Accounts of Chemical Research presents short, concise and critical articles offering easy-to-read overviews of basic research and applications in all areas of chemistry and biochemistry. These short reviews focus on research from the author’s own laboratory and are designed to teach the reader about a research project. In addition, Accounts of Chemical Research publishes commentaries that give an informed opinion on a current research problem. Special Issues online are devoted to a single topic of unusual activity and significance.
Accounts of Chemical Research replaces the traditional article abstract with an article "Conspectus." These entries synopsize the research affording the reader a closer look at the content and significance of an article. Through this provision of a more detailed description of the article contents, the Conspectus enhances the article's discoverability by search engines and the exposure for the research.