Selective/simultaneous batch adsorption of binary textile dyes using amorphous perlite powder: aspects of central composite design optimization and mechanisms

Abstract

Herein, the selectivity/simultaneously adsorption associated with Congo Red (CR) and Methylene Blue (MB) has been efficiently undertaken via amorphous perlite. Under optimum conditions of 38 min, 96 mg/L and 312°K for the contact time, the dye concentration, and the temperature, respectively, the optimization study using central composite design (CCD) matrix gave rise to high adsorption yields of 82.22 and 96.65% for CR and MB, respectively. Importantly, kinetic and isotherm studies attested that the batch adsorption occurs as intra-diffusional mass transport onto porous material. The obtained thermodynamic parameters are indicative of an endothermic/spontaneous physisorption process. Whereas SEM–EDS characterization revealed the superficial adsorption process of both CR and MB onto perlite. In addition, the FTIR analysis suggests that the adsorption process disrupted the short-range compounds order of perlite samples, revealing the marked crystallinity decrease of the adsorbent after adsorption. Finally, application of these optimum conditions tests on real industrial wastewater show that the adsorption was simultaneous at neutral pH and at 312°K, whereas CR and MB can be selectively adsorbed at pH 4 and 9, respectively.

Graphical abstract