五轴并联机床铣削2024-T351铝合金轮廓时加工参数对表面粗糙度的影响

L. V. Suryam, B. BalaKrishna
{"title":"五轴并联机床铣削2024-T351铝合金轮廓时加工参数对表面粗糙度的影响","authors":"L. V. Suryam, B. BalaKrishna","doi":"10.1504/IJASM.2019.10019944","DOIUrl":null,"url":null,"abstract":"Surface roughness is reduced by optimising the machining parameters. This research analyses the effect of machining parameters on surface quality of aluminium 2024 T351 in milling of semi-circular pocket with carbide tool on 5-axis hybrid parallel kinematic machine (HPKM). Three different segmented surfaces were selected on semi-circular pocket and investigated the influence of machining parameters. The selected parameters are spindle speed, feed rate and depth of cut. Investigation of this study results in the optimum parameters that could produce good surface finish. The effect of these cutting parameters is evaluated using L9 Taguchi orthogonal array, s/n ratio, analysis of variance (ANOVA). Based on the result analysis, good surface finish can be obtained at high cutting speed, low feed rate, and low depth of cut. Also, the maximum influence of feed rate among the selected surface segments was ascertained.","PeriodicalId":38028,"journal":{"name":"International Journal of Agile Systems and Management","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-03-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Effect of machining parameters over surface roughness in contour milling of aluminium 2024-T351 using 5-axis parallel kinematic machine\",\"authors\":\"L. V. Suryam, B. BalaKrishna\",\"doi\":\"10.1504/IJASM.2019.10019944\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Surface roughness is reduced by optimising the machining parameters. This research analyses the effect of machining parameters on surface quality of aluminium 2024 T351 in milling of semi-circular pocket with carbide tool on 5-axis hybrid parallel kinematic machine (HPKM). Three different segmented surfaces were selected on semi-circular pocket and investigated the influence of machining parameters. The selected parameters are spindle speed, feed rate and depth of cut. Investigation of this study results in the optimum parameters that could produce good surface finish. The effect of these cutting parameters is evaluated using L9 Taguchi orthogonal array, s/n ratio, analysis of variance (ANOVA). Based on the result analysis, good surface finish can be obtained at high cutting speed, low feed rate, and low depth of cut. Also, the maximum influence of feed rate among the selected surface segments was ascertained.\",\"PeriodicalId\":38028,\"journal\":{\"name\":\"International Journal of Agile Systems and Management\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-03-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Agile Systems and Management\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1504/IJASM.2019.10019944\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"Multidisciplinary\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Agile Systems and Management","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1504/IJASM.2019.10019944","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"Multidisciplinary","Score":null,"Total":0}
引用次数: 1

摘要

通过优化加工参数,降低了表面粗糙度。研究了在五轴混合并联机床(HPKM)上用硬质合金刀具铣削2024 T351铝合金半圆袋时,加工参数对其表面质量的影响。选取了三种不同的半圆弧口袋曲面,研究了加工参数对其加工的影响。所选参数为主轴转速、进给速度和切削深度。通过研究,确定了能产生良好表面光洁度的最佳工艺参数。采用L9田口正交法、信噪比、方差分析(ANOVA)对各切削参数的影响进行评价。结果分析表明,在高切削速度、低进给速度和低切削深度条件下,可获得良好的表面光洁度。同时,确定了进给量对所选曲面段的最大影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Effect of machining parameters over surface roughness in contour milling of aluminium 2024-T351 using 5-axis parallel kinematic machine
Surface roughness is reduced by optimising the machining parameters. This research analyses the effect of machining parameters on surface quality of aluminium 2024 T351 in milling of semi-circular pocket with carbide tool on 5-axis hybrid parallel kinematic machine (HPKM). Three different segmented surfaces were selected on semi-circular pocket and investigated the influence of machining parameters. The selected parameters are spindle speed, feed rate and depth of cut. Investigation of this study results in the optimum parameters that could produce good surface finish. The effect of these cutting parameters is evaluated using L9 Taguchi orthogonal array, s/n ratio, analysis of variance (ANOVA). Based on the result analysis, good surface finish can be obtained at high cutting speed, low feed rate, and low depth of cut. Also, the maximum influence of feed rate among the selected surface segments was ascertained.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
International Journal of Agile Systems and Management
International Journal of Agile Systems and Management Multidisciplinary-Multidisciplinary
CiteScore
2.70
自引率
0.00%
发文量
6
期刊介绍: The objective of IJASM is to establish an effective channel of communication between academia, industry and persons concerned with the design and development of systems. Change is eternal and perpetual, irrespective of type of system. Systems created in the course of the advance of human civilization need to be functionally and operationally sustainable amid changes in technological, political, socio-economical, financial, cultural and other environmental challenges. IJASM aims to promote and harmonize knowledge developments in the emerging fields of agile systems research, sustainability and vulnerability analysis, risk assessments methodologies, complex systems science, e-organisation and e-supply chain management, with emphasis on the international dimension, particularly breaking cultural barriers, and on national contexts, globalisation and new business practices. As such, we aim to publish papers presenting new research, innovative theoretical approaches, changes in agile management paradigms, and action (both examples of successes and failures as long as there are important lessons to be learned) from leading scholars and practitioners. Papers generally fall into two broad categories: those grounded in theory and/or papers using scientific research methods (e.g., reports of original empirical studies, models, critical reviews of existing empirical research, theory pieces that clearly extend current thinking); and those focusing on innovative agile approaches that are based on well reasoned extensions of existing research, experiential knowledge, or exemplary cases (e.g., thought pieces, case studies, etc).
期刊最新文献
Assessment of Apical Pressures in Single and Joining Canals - An Ex Vivo Study Based on Computational Fluid Dynamic Analysis. A systematic literature review for the analysis of practices, measurement instruments and contextual factors inherent to supply chain agility Peak power policies in job shop manufacturing systems Interplay between agile manufacturing and the Internet of Things Project virtual teams: systematic literature review
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1