液滴破碎和表面张力对固体火箭发动机喷管机械腐蚀的影响

IF 2.6 3区 工程技术 Q3 ENERGY & FUELS Journal of Energy Resources Technology-transactions of The Asme Pub Date : 2023-02-24 DOI:10.1115/1.4056995
Mohamed Abousabae, R. Amano
{"title":"液滴破碎和表面张力对固体火箭发动机喷管机械腐蚀的影响","authors":"Mohamed Abousabae, R. Amano","doi":"10.1115/1.4056995","DOIUrl":null,"url":null,"abstract":"\n Erosion prediction of the solid propellent nozzle is vital for its design process. This erosion is caused by the impingement of agglomerated aluminum/aluminum oxide particles on the nozzle walls. Thus, a multi-phase numerical model is established based on the Eulerian-Lagrangian approach to model the aluminum particles burning inside the combustion chamber and simulate the mechanical erosion of the nozzle. The numerical model is validated against numerical and experimental results from the literature. Then it is simplified by eliminating the aluminum particles burning process as they do not reach the nozzle. The simplified model will be further used in modeling the agglomerates' breakup and predicting the mechanical erosion for aluminum particles with lower surface tension. The results showed that applying the Reitz-Diwakar breakup model reduces the erosion rate by 6.2% - 24% depending on the injected droplets. In addition, it was found that a decrease in the erosion rate by 1% to 4.5% can be achieved by reducing the aluminum additive's surface tension by 15%.","PeriodicalId":15676,"journal":{"name":"Journal of Energy Resources Technology-transactions of The Asme","volume":null,"pages":null},"PeriodicalIF":2.6000,"publicationDate":"2023-02-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Mechanical Erosion Investigation in Solid Rocket Motor Nozzle Through Droplet Breakup and Surface Tension Influence\",\"authors\":\"Mohamed Abousabae, R. Amano\",\"doi\":\"10.1115/1.4056995\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Erosion prediction of the solid propellent nozzle is vital for its design process. This erosion is caused by the impingement of agglomerated aluminum/aluminum oxide particles on the nozzle walls. Thus, a multi-phase numerical model is established based on the Eulerian-Lagrangian approach to model the aluminum particles burning inside the combustion chamber and simulate the mechanical erosion of the nozzle. The numerical model is validated against numerical and experimental results from the literature. Then it is simplified by eliminating the aluminum particles burning process as they do not reach the nozzle. The simplified model will be further used in modeling the agglomerates' breakup and predicting the mechanical erosion for aluminum particles with lower surface tension. The results showed that applying the Reitz-Diwakar breakup model reduces the erosion rate by 6.2% - 24% depending on the injected droplets. In addition, it was found that a decrease in the erosion rate by 1% to 4.5% can be achieved by reducing the aluminum additive's surface tension by 15%.\",\"PeriodicalId\":15676,\"journal\":{\"name\":\"Journal of Energy Resources Technology-transactions of The Asme\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.6000,\"publicationDate\":\"2023-02-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Energy Resources Technology-transactions of The Asme\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1115/1.4056995\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Energy Resources Technology-transactions of The Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4056995","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
引用次数: 0

摘要

固体推进剂喷嘴的腐蚀预测对其设计过程至关重要。这种侵蚀是由聚集的铝/氧化铝颗粒撞击喷嘴壁引起的。因此,基于欧拉-拉格朗日方法建立了一个多相数值模型,以模拟燃烧室内燃烧的铝颗粒,并模拟喷嘴的机械侵蚀。根据文献中的数值和实验结果对数值模型进行了验证。然后,由于铝颗粒没有到达喷嘴,因此消除了铝颗粒燃烧过程,从而简化了流程。简化模型将进一步用于模拟团聚体的破碎,并预测表面张力较低的铝颗粒的机械侵蚀。结果表明,应用Reitz-Diwakar破碎模型,根据注入液滴的不同,侵蚀率降低了6.2%-24%。此外,发现通过将铝添加剂的表面张力降低15%可以实现侵蚀率降低1%至4.5%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Mechanical Erosion Investigation in Solid Rocket Motor Nozzle Through Droplet Breakup and Surface Tension Influence
Erosion prediction of the solid propellent nozzle is vital for its design process. This erosion is caused by the impingement of agglomerated aluminum/aluminum oxide particles on the nozzle walls. Thus, a multi-phase numerical model is established based on the Eulerian-Lagrangian approach to model the aluminum particles burning inside the combustion chamber and simulate the mechanical erosion of the nozzle. The numerical model is validated against numerical and experimental results from the literature. Then it is simplified by eliminating the aluminum particles burning process as they do not reach the nozzle. The simplified model will be further used in modeling the agglomerates' breakup and predicting the mechanical erosion for aluminum particles with lower surface tension. The results showed that applying the Reitz-Diwakar breakup model reduces the erosion rate by 6.2% - 24% depending on the injected droplets. In addition, it was found that a decrease in the erosion rate by 1% to 4.5% can be achieved by reducing the aluminum additive's surface tension by 15%.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
6.40
自引率
30.00%
发文量
213
审稿时长
4.5 months
期刊介绍: Specific areas of importance including, but not limited to: Fundamentals of thermodynamics such as energy, entropy and exergy, laws of thermodynamics; Thermoeconomics; Alternative and renewable energy sources; Internal combustion engines; (Geo) thermal energy storage and conversion systems; Fundamental combustion of fuels; Energy resource recovery from biomass and solid wastes; Carbon capture; Land and offshore wells drilling; Production and reservoir engineering;, Economics of energy resource exploitation
期刊最新文献
Modeling and influence factors analysis of refueling emissions for plug-in hybrid electric vehicles Structure optimization and performance evaluation of downhole oil-water separation tools: a novel hydrocyclone Effects of Trapped Gas in Fracture-Pore Carbonate Reservoirs Shale Oil-water Two-phase Flow Simulation based on Pore Network Modeling Investigation on the effects of nanorefrigerants in a combined cycle of ejector refrigeration cycle and Kalina cycle
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1