{"title":"封闭和开放系统冻融循环对GMB-GCL界面透射率的影响","authors":"R. Kerry Rowe, N. Martinez Noboa, R. Brachman","doi":"10.1680/jgein.22.00297","DOIUrl":null,"url":null,"abstract":"An experimental study of the effect of closed system and a limited study of open system freeze-thaw cycles on the interface transmissivity at applied stresses between 10 and 150 kPa is described. The effect of closed system freeze-thaw is most apparent after 100 freeze-thaw cycles and permeation at a stress ≤25 kPa. The effect of permeating fluid chemistry is also evident but decreased with increasing stress. One notable effect of permeant is the potential for internal erosion along weaknesses in the bentonite created by freeze-thaw cycles when permeated by distilled or reverse osmosis water. This is not observed when permeated with simulated porewater containing cations. In terms of practical application, closed system freeze-thaw cycles appear to have little effect on interface transmissivity, and to the extent that there is an effect, it is beneficial. In contrast, cryogenic suction arising with open system freeze-thaw cycles is shown to result in the formation of ice lenses both within the GCL and at the GCL geomembrane interface. Although limited, the data suggest that the effect of ice lens formation on interface transmissivity after open system freeze-thaw cycles is largely eliminated at applied stress above 20-25 kPa, although more research is warranted.","PeriodicalId":12616,"journal":{"name":"Geosynthetics International","volume":" ","pages":""},"PeriodicalIF":2.8000,"publicationDate":"2022-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Effect of closed and open system freeze-thaw cycles on GMB-GCL interface transmissivity\",\"authors\":\"R. Kerry Rowe, N. Martinez Noboa, R. Brachman\",\"doi\":\"10.1680/jgein.22.00297\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"An experimental study of the effect of closed system and a limited study of open system freeze-thaw cycles on the interface transmissivity at applied stresses between 10 and 150 kPa is described. The effect of closed system freeze-thaw is most apparent after 100 freeze-thaw cycles and permeation at a stress ≤25 kPa. The effect of permeating fluid chemistry is also evident but decreased with increasing stress. One notable effect of permeant is the potential for internal erosion along weaknesses in the bentonite created by freeze-thaw cycles when permeated by distilled or reverse osmosis water. This is not observed when permeated with simulated porewater containing cations. In terms of practical application, closed system freeze-thaw cycles appear to have little effect on interface transmissivity, and to the extent that there is an effect, it is beneficial. In contrast, cryogenic suction arising with open system freeze-thaw cycles is shown to result in the formation of ice lenses both within the GCL and at the GCL geomembrane interface. Although limited, the data suggest that the effect of ice lens formation on interface transmissivity after open system freeze-thaw cycles is largely eliminated at applied stress above 20-25 kPa, although more research is warranted.\",\"PeriodicalId\":12616,\"journal\":{\"name\":\"Geosynthetics International\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2022-09-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Geosynthetics International\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://doi.org/10.1680/jgein.22.00297\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, GEOLOGICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Geosynthetics International","FirstCategoryId":"89","ListUrlMain":"https://doi.org/10.1680/jgein.22.00297","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, GEOLOGICAL","Score":null,"Total":0}
Effect of closed and open system freeze-thaw cycles on GMB-GCL interface transmissivity
An experimental study of the effect of closed system and a limited study of open system freeze-thaw cycles on the interface transmissivity at applied stresses between 10 and 150 kPa is described. The effect of closed system freeze-thaw is most apparent after 100 freeze-thaw cycles and permeation at a stress ≤25 kPa. The effect of permeating fluid chemistry is also evident but decreased with increasing stress. One notable effect of permeant is the potential for internal erosion along weaknesses in the bentonite created by freeze-thaw cycles when permeated by distilled or reverse osmosis water. This is not observed when permeated with simulated porewater containing cations. In terms of practical application, closed system freeze-thaw cycles appear to have little effect on interface transmissivity, and to the extent that there is an effect, it is beneficial. In contrast, cryogenic suction arising with open system freeze-thaw cycles is shown to result in the formation of ice lenses both within the GCL and at the GCL geomembrane interface. Although limited, the data suggest that the effect of ice lens formation on interface transmissivity after open system freeze-thaw cycles is largely eliminated at applied stress above 20-25 kPa, although more research is warranted.
期刊介绍:
An online only, rapid publication journal, Geosynthetics International – an official journal of the International Geosynthetics Society (IGS) – publishes the best information on current geosynthetics technology in research, design innovation, new materials and construction practice.
Topics covered
The whole of geosynthetic materials (including natural fibre products) such as research, behaviour, performance analysis, testing, design, construction methods, case histories and field experience. Geosynthetics International is received by all members of the IGS as part of their membership, and is published in e-only format six times a year.