Adsorption Studies of Ammonia, Protein, and Phytic Acid Using Chitosan Fiber Coated with Oxidized Cellulose Nanofiber

Herein, chitosan (CS) fibers coated with TEMPO-oxidized cellulose nanofibers (CS/TOCN fibers) were successfully prepared using a wet spinning technique; CS was dissolved in acetic acid to obtain a CS doping solution. The tensile strength and ammonia adsorption percentages increased with increasing TOCN concentration. The maximum ammonia adsorption percentage (41.39%, 8.3 mg/g) was obtained when 2% NaOH and 0.01% TOCN were used as the coagulation solution. Additionally, the adsorption of model proteins, including lysozyme (Lz), cytochrome C (Cyt C), and bovine serum albumin (BSA), were studied. In water, the CS/TOCN fibers with negative charges adsorbed more Lz with positive charges than CS fibers containing positive charges. Contrastingly, CS fibers adsorbed more Cyt C and BSA containing negative charges in phosphate-buffered saline solutions than CS/TOCN fibers. Furthermore, the adsorption percentage of phytic acid using the CS/TOCN fibers reached 64.18% (288 mg/g) within 60 min. Thus, TOCNs improved the tensile properties of CS fibers and preferred positively charged materials contaminated in water, such as ammonia, Lz, and phytic acid.