Orastie-Sibiu高速公路高架桥的动力试验

IF 0.1 Q4 ENGINEERING, CIVIL Romanian Journal of Transport Infrastructure Pub Date : 2017-07-01 DOI:10.1515/rjti-2017-0051
Ghindea Cristian Lucian, Răcănel Ionuţ Radu, Cruciat Radu Iuliu
{"title":"Orastie-Sibiu高速公路高架桥的动力试验","authors":"Ghindea Cristian Lucian, Răcănel Ionuţ Radu, Cruciat Radu Iuliu","doi":"10.1515/rjti-2017-0051","DOIUrl":null,"url":null,"abstract":"Abstract Dynamic testing of bridges has as target to establish their response on pulse forces between the wheels and unevenness of road surface. Generally, during the tests, real time accelerations or deformations are to be measured and which through successive processing methods lead to other data as velocities, displacements, dynamic impact factor, but also the damping ratio. In order to validate the bridge response following testing, the measured data are compared both with allowable limits existing in standards and with the results obtained using analytical or numerical models. In Romania, the dynamic testing of bridges is recommended by the current standards, only for important bridges, erected in complex or special solutions and also for large span bridges. The aim of this paper is to outline the results obtained from the on-site measurements during dynamic testing of a viaduct placed on the motorway A1, sector Orăştie-Sibiu. The bridge superstructure is a composite one, continuous girder on 12 spans: 40+10×60+40 m, the substructure consisting in 11 piers with lamellar elevations and variable height in the range 8.50-24m. In the paper a finite element model is also presented which was used for time-history analyses using an impulse type load. Finally, the results obtained on the site and using the numerical model are compared and discussed.","PeriodicalId":40630,"journal":{"name":"Romanian Journal of Transport Infrastructure","volume":"6 1","pages":"15 - 29"},"PeriodicalIF":0.1000,"publicationDate":"2017-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Dynamic Test of a Viaduct on the Orastie–Sibiu Highway\",\"authors\":\"Ghindea Cristian Lucian, Răcănel Ionuţ Radu, Cruciat Radu Iuliu\",\"doi\":\"10.1515/rjti-2017-0051\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Dynamic testing of bridges has as target to establish their response on pulse forces between the wheels and unevenness of road surface. Generally, during the tests, real time accelerations or deformations are to be measured and which through successive processing methods lead to other data as velocities, displacements, dynamic impact factor, but also the damping ratio. In order to validate the bridge response following testing, the measured data are compared both with allowable limits existing in standards and with the results obtained using analytical or numerical models. In Romania, the dynamic testing of bridges is recommended by the current standards, only for important bridges, erected in complex or special solutions and also for large span bridges. The aim of this paper is to outline the results obtained from the on-site measurements during dynamic testing of a viaduct placed on the motorway A1, sector Orăştie-Sibiu. The bridge superstructure is a composite one, continuous girder on 12 spans: 40+10×60+40 m, the substructure consisting in 11 piers with lamellar elevations and variable height in the range 8.50-24m. In the paper a finite element model is also presented which was used for time-history analyses using an impulse type load. Finally, the results obtained on the site and using the numerical model are compared and discussed.\",\"PeriodicalId\":40630,\"journal\":{\"name\":\"Romanian Journal of Transport Infrastructure\",\"volume\":\"6 1\",\"pages\":\"15 - 29\"},\"PeriodicalIF\":0.1000,\"publicationDate\":\"2017-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Romanian Journal of Transport Infrastructure\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1515/rjti-2017-0051\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, CIVIL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Romanian Journal of Transport Infrastructure","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1515/rjti-2017-0051","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 1

摘要

摘要桥梁动态试验的目标是建立其对车轮间脉冲力和路面不平坦度的响应。通常,在测试过程中,要测量实时加速度或变形,并通过连续的处理方法得出其他数据,如速度、位移、动态冲击系数以及阻尼比。为了验证测试后的桥梁响应,将测量数据与标准中的允许限值以及使用分析或数值模型获得的结果进行比较。在罗马尼亚,现行标准建议对桥梁进行动态测试,仅适用于在复杂或特殊解决方案中架设的重要桥梁,也适用于大跨度桥梁。本文的目的是概述对A1高速公路Orăştie Sibiu区高架桥进行动态测试期间的现场测量结果。桥梁上部结构为组合结构,连续梁,跨度为12跨:40+10×60+40m,下部结构由11个墩组成,墩高为8.50-24m不等。本文还建立了一个有限元模型,用于脉冲型荷载的时程分析。最后,对现场和数值模型的结果进行了比较和讨论。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Dynamic Test of a Viaduct on the Orastie–Sibiu Highway
Abstract Dynamic testing of bridges has as target to establish their response on pulse forces between the wheels and unevenness of road surface. Generally, during the tests, real time accelerations or deformations are to be measured and which through successive processing methods lead to other data as velocities, displacements, dynamic impact factor, but also the damping ratio. In order to validate the bridge response following testing, the measured data are compared both with allowable limits existing in standards and with the results obtained using analytical or numerical models. In Romania, the dynamic testing of bridges is recommended by the current standards, only for important bridges, erected in complex or special solutions and also for large span bridges. The aim of this paper is to outline the results obtained from the on-site measurements during dynamic testing of a viaduct placed on the motorway A1, sector Orăştie-Sibiu. The bridge superstructure is a composite one, continuous girder on 12 spans: 40+10×60+40 m, the substructure consisting in 11 piers with lamellar elevations and variable height in the range 8.50-24m. In the paper a finite element model is also presented which was used for time-history analyses using an impulse type load. Finally, the results obtained on the site and using the numerical model are compared and discussed.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
6
审稿时长
10 weeks
期刊最新文献
The influence of the introduction of an artificial neural network for traffic signal control Impact of remittances on exports and economic growth: a cross country analysis The influence of the introduction of public transportation lanes in the municipality of Bucharest A Moderation effect of atmospheric conditions on PM2.5 traffic related concentration Impact of expansion joints on noise pollution, case study in Cluj-Napoca
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1