冉仓班君电池组锂48 v 50 ah

Nur Aidi Ariyanto, Faqih Fatkhurrozak, Donny Prasetio
{"title":"冉仓班君电池组锂48 v 50 ah","authors":"Nur Aidi Ariyanto, Faqih Fatkhurrozak, Donny Prasetio","doi":"10.32497/eksergi.v18i1.3227","DOIUrl":null,"url":null,"abstract":"The electric vehicle is a vehicle with a driving source of an electric motor, requiring a battery for the stored energy. Battery packs are widely used as energy storage for electric vehicles. The battery pack is a series of several small batteries arranged in series and parallel so that they have an output voltage and capacity as required. 18650 Lithium battery is the most widely used to make battery packs and used on electric motorcycles. a 18650 Lithium battery has an output voltage of 3.7 V with various capacities such as 1500 mAh, 2000 mAh, 3000 mAh, etc. To design a 48 V 50 Ah battery pack requires a series of 18650 3.7 V 3000 mAh batteries which are arranged 13 pieces in series and 19 pieces in parallel. Before assembling, each 18650 battery must be checked for voltage, the voltage in each 18650 battery must be in the range of 3 – 4.2 V. If it is less than 3 V then it needs to be recharged, if it is less than 2 V then the battery condition is not good. The battery pack discharging test is carried out by loading a BLDC 2000W 48V electric motor until the battery pack voltage drops to 39 V. The discharging process lasts for 13 hours with an average current of 3.5 A. From the test results, the battery pack capacity can be calculated, namely 45.5 Ah.","PeriodicalId":30703,"journal":{"name":"Eksergi","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-01-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"RANCANG BANGUN BATTERY PACK LITHIUM 48 V 50 AH\",\"authors\":\"Nur Aidi Ariyanto, Faqih Fatkhurrozak, Donny Prasetio\",\"doi\":\"10.32497/eksergi.v18i1.3227\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The electric vehicle is a vehicle with a driving source of an electric motor, requiring a battery for the stored energy. Battery packs are widely used as energy storage for electric vehicles. The battery pack is a series of several small batteries arranged in series and parallel so that they have an output voltage and capacity as required. 18650 Lithium battery is the most widely used to make battery packs and used on electric motorcycles. a 18650 Lithium battery has an output voltage of 3.7 V with various capacities such as 1500 mAh, 2000 mAh, 3000 mAh, etc. To design a 48 V 50 Ah battery pack requires a series of 18650 3.7 V 3000 mAh batteries which are arranged 13 pieces in series and 19 pieces in parallel. Before assembling, each 18650 battery must be checked for voltage, the voltage in each 18650 battery must be in the range of 3 – 4.2 V. If it is less than 3 V then it needs to be recharged, if it is less than 2 V then the battery condition is not good. The battery pack discharging test is carried out by loading a BLDC 2000W 48V electric motor until the battery pack voltage drops to 39 V. The discharging process lasts for 13 hours with an average current of 3.5 A. From the test results, the battery pack capacity can be calculated, namely 45.5 Ah.\",\"PeriodicalId\":30703,\"journal\":{\"name\":\"Eksergi\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Eksergi\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.32497/eksergi.v18i1.3227\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Eksergi","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.32497/eksergi.v18i1.3227","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

电动汽车是一种具有电动机驱动源的车辆,需要电池来存储能量。电池组被广泛用于电动汽车的储能。电池组是一系列的几个小电池串联和并联,使他们有一个输出电压和容量的要求。18650锂电池是最广泛用于制造电池组和电动摩托车的电池。18650锂电池的输出电压为3.7 V,容量有1500毫安时、2000毫安时、3000毫安时等。为了设计一个48v 50ah的电池组,需要一组18650 3.7 V 3000mah的电池,13片串联,19片并联。18650电池在装配前必须进行电压检查,每块18650电池的电压应在3 ~ 4.2 V之间。如果低于3v则需要充电,如果低于2v则电池状况不好。电池组放电试验通过加载BLDC 2000W 48V电动机进行,直至电池组电压降至39v。放电时间为13小时,平均电流为3.5 A。从测试结果可以计算出电池组容量,即45.5 Ah。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
RANCANG BANGUN BATTERY PACK LITHIUM 48 V 50 AH
The electric vehicle is a vehicle with a driving source of an electric motor, requiring a battery for the stored energy. Battery packs are widely used as energy storage for electric vehicles. The battery pack is a series of several small batteries arranged in series and parallel so that they have an output voltage and capacity as required. 18650 Lithium battery is the most widely used to make battery packs and used on electric motorcycles. a 18650 Lithium battery has an output voltage of 3.7 V with various capacities such as 1500 mAh, 2000 mAh, 3000 mAh, etc. To design a 48 V 50 Ah battery pack requires a series of 18650 3.7 V 3000 mAh batteries which are arranged 13 pieces in series and 19 pieces in parallel. Before assembling, each 18650 battery must be checked for voltage, the voltage in each 18650 battery must be in the range of 3 – 4.2 V. If it is less than 3 V then it needs to be recharged, if it is less than 2 V then the battery condition is not good. The battery pack discharging test is carried out by loading a BLDC 2000W 48V electric motor until the battery pack voltage drops to 39 V. The discharging process lasts for 13 hours with an average current of 3.5 A. From the test results, the battery pack capacity can be calculated, namely 45.5 Ah.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
审稿时长
4 weeks
期刊最新文献
Studi Efektivitas Pemanfaatan Arang Aktif Cangkang Kelapa Sawit (Elaeis guineensis) Sebagai Adsorben Pengurangan Kadar Amonia Limbah Cair Tahu Efisiensi Thermal Alat Economizer pada Pre-Treatment Section dalam Pengolahan Crude Palm Oil (CPO) Effect of Chitosan-TiO2 Membrane Performance for the Degradation of Batik Waste with a Photocatalytic Hybrid System Kinetika Produksi Selulosa Bakteri dari Limbah Kulit Pisang Optimasi Komposisi MDEA dan MEA Sebagai Absorbent untuk Proses Penghilangan CO2 dalam Produksi Gas di Lapangan A
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1