INVESTIGATING THE COMPARISON OF SHIP RESISTANCE COMPONENTS BETWEEN U AND V-SHAPED HULLS

The selection of a hull design with minimal drag is an important effort to reduce emission levels on ships. Two different hull shapes, U and V hulls, have unique properties that affect their drag production, which has been studied extensively in the past. This study aims to re-examine the differences between the two hull types by conducting a simple analysis of drag prediction results using empirical and numerical slender body methods. Both hull models in this study have the same size and volume. The results indicate that the U hull has a higher frictional resistance ( ) than the V hull due to its wider wetted surface area ( ). Additionally, the viscous pressure resistance ( ) and form factor coefficient ( ) of the U hull are also higher than those of the V hull. However, for Froude numbers (Fr) above 0.245, the U hull has lower wave resistance ( ) than the V hull, whereas for Fr below 0.245, the U hull has higher . Overall, the U hull produces a higher total resistance ( ) than the V hull at low speeds, but a lower  at high speeds. Therefore, the choice of hull shape for minimizing a ship's resistance is influenced by the desired speed of service. If Fr is low, below 0.24, a V-shaped hull is more suitable. However, if Fr is higher than 0.24, a U-shaped hull is more appropriate.