Reduction of High-Voltage Cable Line Capacity Caused by Implementation of Magnetic Field Shielding Techniques

The paper deals with a capacity of high-voltage cable line made of three single-core cross-linked polyethylene insulated power cables. We consider three cases. First is a single-point bonded cable system when no magnetic field shielding technique is implemented and the capacity achieves maximum values. Second is a solidly bonded cable system when a thermal effect of induced shield currents causes a capacity reduction. The third case under study is a single-point bonded cable system covered by the passive loop. The passive loop mitigates the cable line magnetic field as well as the solidly bonding does, but also the thermal effect of passive loop currents reduces the capacity. The goal of the paper is to evaluate the relative change of cable line capacity when implementing magnetic field shielding techniques comparably to unshielded case. To achieve the goal we use a standard IEC 60287 when calculating the cable line capacity in the first and the second cases, and a thermal field simulation in the third case. The capacity is evaluated by successive approximations. Iterations are stopped when the conductor reaches the maximum operating temperature. We show that the increase in cable spacing does not guarantee the capacity increase when the solid bonding of cable shields or the passive loop is used. The most significant result is the substantiation of the advantages of passive loop, which provides the greater capacity in comparison with solid bonding at equivalent magnetic field shielding efficiencies. The obtained results can be used when choosing the type of bonding and the technique of cable line magnetic field mitigation.