{"title":"基于SEPIC变换器的光伏系统的滑模控制","authors":"Meng Zhang, N. Zhong, Mingyuan Ma","doi":"10.1080/21642583.2021.1872043","DOIUrl":null,"url":null,"abstract":"Photovoltaic (PV) energy can be considered to be as highly efficient energy source since it is ecofriendly, harmless and available endlessly. In order to improve the output power of photovoltaic cells, the maximum power point tracking technology is used in PV systems. This paper designs a sliding mode controller based on SEPIC converter to implement MPPT. The difference from other methods is that the proposed method uses the circuit output voltage U 0 in the closed-loop system, so that the controller has better control effect. The buck-boost feature of the SEPIC widens the applicable PV voltage and thus increases the adopted PV module flexibility. First, the photovoltaic array is modeled and the simulation results are analyzed in this paper. Then model and analyze the SEPIC circuit and derive a sliding mode control strategy based on this circuit. Finally, the results obtained in MATLAB/Simulink were compared with the conventional P&O algorithm and INC algorithm. The results show that the sliding mode controller proposed in this paper has faster speed and less oscillation when tracking the maximum power point (MPP).","PeriodicalId":46282,"journal":{"name":"Systems Science & Control Engineering","volume":null,"pages":null},"PeriodicalIF":3.2000,"publicationDate":"2021-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1080/21642583.2021.1872043","citationCount":"1","resultStr":"{\"title\":\"Sliding mode control of SEPIC converter based photovoltaic system\",\"authors\":\"Meng Zhang, N. Zhong, Mingyuan Ma\",\"doi\":\"10.1080/21642583.2021.1872043\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Photovoltaic (PV) energy can be considered to be as highly efficient energy source since it is ecofriendly, harmless and available endlessly. In order to improve the output power of photovoltaic cells, the maximum power point tracking technology is used in PV systems. This paper designs a sliding mode controller based on SEPIC converter to implement MPPT. The difference from other methods is that the proposed method uses the circuit output voltage U 0 in the closed-loop system, so that the controller has better control effect. The buck-boost feature of the SEPIC widens the applicable PV voltage and thus increases the adopted PV module flexibility. First, the photovoltaic array is modeled and the simulation results are analyzed in this paper. Then model and analyze the SEPIC circuit and derive a sliding mode control strategy based on this circuit. Finally, the results obtained in MATLAB/Simulink were compared with the conventional P&O algorithm and INC algorithm. The results show that the sliding mode controller proposed in this paper has faster speed and less oscillation when tracking the maximum power point (MPP).\",\"PeriodicalId\":46282,\"journal\":{\"name\":\"Systems Science & Control Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.2000,\"publicationDate\":\"2021-05-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1080/21642583.2021.1872043\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Systems Science & Control Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1080/21642583.2021.1872043\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"AUTOMATION & CONTROL SYSTEMS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Systems Science & Control Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/21642583.2021.1872043","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"AUTOMATION & CONTROL SYSTEMS","Score":null,"Total":0}
Sliding mode control of SEPIC converter based photovoltaic system
Photovoltaic (PV) energy can be considered to be as highly efficient energy source since it is ecofriendly, harmless and available endlessly. In order to improve the output power of photovoltaic cells, the maximum power point tracking technology is used in PV systems. This paper designs a sliding mode controller based on SEPIC converter to implement MPPT. The difference from other methods is that the proposed method uses the circuit output voltage U 0 in the closed-loop system, so that the controller has better control effect. The buck-boost feature of the SEPIC widens the applicable PV voltage and thus increases the adopted PV module flexibility. First, the photovoltaic array is modeled and the simulation results are analyzed in this paper. Then model and analyze the SEPIC circuit and derive a sliding mode control strategy based on this circuit. Finally, the results obtained in MATLAB/Simulink were compared with the conventional P&O algorithm and INC algorithm. The results show that the sliding mode controller proposed in this paper has faster speed and less oscillation when tracking the maximum power point (MPP).
期刊介绍:
Systems Science & Control Engineering is a world-leading fully open access journal covering all areas of theoretical and applied systems science and control engineering. The journal encourages the submission of original articles, reviews and short communications in areas including, but not limited to: · artificial intelligence · complex systems · complex networks · control theory · control applications · cybernetics · dynamical systems theory · operations research · systems biology · systems dynamics · systems ecology · systems engineering · systems psychology · systems theory