Optimization of sound insulation of flat panel photobioreactors for bioenergy facades

Flat panel photobioreactors consisting of different layers of glass panes, designed to allow heat and microalgae biomass production in a water layer by solar radiation at the facade of buildings (i.e. bioenergy facade), were acoustically examined and further developed for increased sound insulation against external noise exposure. The sound insulation was first examined by simulations on double-, triple- and four-skin bioreactor variants. Parameters such as the distance between panes, the number and types of layers, as well as the material and thickness of the glass panes, were varied. Especially the influence of decoupling layers and an airlift on the sound reduction index was evaluated. Based on the simulation results, a modular prototype was developed which could be converted into a double-, triple- or four-skin structure as required. The sound reduction of these was studied in an acoustic window laboratory experimentally. The highest measured weighted sound reduction index of 51 dB was obtained with a four-skin photobioreactor variant with four glass pane layers and a water layer. The weighted sound reduction indexes for alternative four-skin opaque prototype variants with a plasterboard layer were 2—3 dB lower. The double- and triple-skin variants achieved 43—47 dB. The use of XPS as insulation material in the outer air layers of the triple- and four-skin variants reduced the weighted sound reduction index by 2 dB. The airlift needed for turbulent mixing of the microalgae had no effect on the sound insulation but increased the average ambient noise level by up to 10 dB. With 51 dB, the four-shell photobioreactor prototype achieves sound insulation class 5 according to the german regulation VDI 2719 for windows and thus fulfills the function of a sound insulation element in the facade of buildings or in a soundproof wall.