{"title":"具有高临界电流的长长度YBCO涂层不锈钢带","authors":"A. Usoskin, A. Rutt, J. Knoke, R. Dietrich","doi":"10.1063/1.2192414","DOIUrl":null,"url":null,"abstract":"Progress in manufacturing 40m long YBCO coated stainless steel tapes by ion beam assisted deposition and by high‐rate pulsed laser deposition is reported. A critical current of 84.5A (77K, self field) was observed for end‐to‐end measurements of the 40m long tape based on a 1.05μm thick and 3.6mm wide YBCO film. This implies that a critical current of 235A per cm‐width is achieved by just a 1 μm thick YBCO layer. Analysis of the influence of local defects onto the integral U(I) curves allowed to formulate a general criterion for the homogeneity in terms of reduced number of tape parameters.A deterioration of tapes induced by mechanical torsion starts at a very high deformation degree: irreversibility threshold corresponds to 3000 angular degrees per meter for 4mm wide coated tape loaded with a 40N tensile axial force.","PeriodicalId":80359,"journal":{"name":"Advances in cryogenic engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2006-04-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1063/1.2192414","citationCount":"10","resultStr":"{\"title\":\"Long‐Length YBCO Coated Stainless Steel Tapes with High Critical Currents\",\"authors\":\"A. Usoskin, A. Rutt, J. Knoke, R. Dietrich\",\"doi\":\"10.1063/1.2192414\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Progress in manufacturing 40m long YBCO coated stainless steel tapes by ion beam assisted deposition and by high‐rate pulsed laser deposition is reported. A critical current of 84.5A (77K, self field) was observed for end‐to‐end measurements of the 40m long tape based on a 1.05μm thick and 3.6mm wide YBCO film. This implies that a critical current of 235A per cm‐width is achieved by just a 1 μm thick YBCO layer. Analysis of the influence of local defects onto the integral U(I) curves allowed to formulate a general criterion for the homogeneity in terms of reduced number of tape parameters.A deterioration of tapes induced by mechanical torsion starts at a very high deformation degree: irreversibility threshold corresponds to 3000 angular degrees per meter for 4mm wide coated tape loaded with a 40N tensile axial force.\",\"PeriodicalId\":80359,\"journal\":{\"name\":\"Advances in cryogenic engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2006-04-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1063/1.2192414\",\"citationCount\":\"10\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advances in cryogenic engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1063/1.2192414\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advances in cryogenic engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1063/1.2192414","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Long‐Length YBCO Coated Stainless Steel Tapes with High Critical Currents
Progress in manufacturing 40m long YBCO coated stainless steel tapes by ion beam assisted deposition and by high‐rate pulsed laser deposition is reported. A critical current of 84.5A (77K, self field) was observed for end‐to‐end measurements of the 40m long tape based on a 1.05μm thick and 3.6mm wide YBCO film. This implies that a critical current of 235A per cm‐width is achieved by just a 1 μm thick YBCO layer. Analysis of the influence of local defects onto the integral U(I) curves allowed to formulate a general criterion for the homogeneity in terms of reduced number of tape parameters.A deterioration of tapes induced by mechanical torsion starts at a very high deformation degree: irreversibility threshold corresponds to 3000 angular degrees per meter for 4mm wide coated tape loaded with a 40N tensile axial force.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
