不同初始斜率和变碳纤维数加筋板的优化设计

IF 1.4 4区 工程技术 Q3 ENGINEERING, CIVIL Latin American Journal of Solids and Structures Pub Date : 2023-08-04 DOI:10.1590/1679-78257584
E. Vieira, D. M. Leon, R. Marczak
{"title":"不同初始斜率和变碳纤维数加筋板的优化设计","authors":"E. Vieira, D. M. Leon, R. Marczak","doi":"10.1590/1679-78257584","DOIUrl":null,"url":null,"abstract":"Optimization methods for curvilinear reinforcements placement aims to improve mechanical response of structure. Whenever a gradient-based method is used to optimization, it is necessary arbitrate an initial placement for the fibers. This initial guess has influence on the result. This work aims to observe the influence of the initial positioning of straight carbon fiber in epoxy resin plates, which had their compliance minimized by Sequential Linear Programming. The maximum displacement is observed too, even if it is not an objective function. The case studies were carried out on the same structure and the number of fibers and its slope were changed. Variation of the force slope was also evaluated. The results confirmed an influence of the initial slope in results. The addition of a greater number of fibers does not always cause a better performance in the design. To achieve the best results, it is essential that the initial arrangement be configured in such a way as to provide proximity of the ends of the fibers and the forces and supports. It's important to try to place the fibers with axial directions close to the axial direction of the force.","PeriodicalId":18192,"journal":{"name":"Latin American Journal of Solids and Structures","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2023-08-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Optimization of plates reinforced with different initial slope and variable number of carbon fibers\",\"authors\":\"E. Vieira, D. M. Leon, R. Marczak\",\"doi\":\"10.1590/1679-78257584\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Optimization methods for curvilinear reinforcements placement aims to improve mechanical response of structure. Whenever a gradient-based method is used to optimization, it is necessary arbitrate an initial placement for the fibers. This initial guess has influence on the result. This work aims to observe the influence of the initial positioning of straight carbon fiber in epoxy resin plates, which had their compliance minimized by Sequential Linear Programming. The maximum displacement is observed too, even if it is not an objective function. The case studies were carried out on the same structure and the number of fibers and its slope were changed. Variation of the force slope was also evaluated. The results confirmed an influence of the initial slope in results. The addition of a greater number of fibers does not always cause a better performance in the design. To achieve the best results, it is essential that the initial arrangement be configured in such a way as to provide proximity of the ends of the fibers and the forces and supports. It's important to try to place the fibers with axial directions close to the axial direction of the force.\",\"PeriodicalId\":18192,\"journal\":{\"name\":\"Latin American Journal of Solids and Structures\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2023-08-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Latin American Journal of Solids and Structures\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1590/1679-78257584\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CIVIL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Latin American Journal of Solids and Structures","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1590/1679-78257584","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Optimization of plates reinforced with different initial slope and variable number of carbon fibers
Optimization methods for curvilinear reinforcements placement aims to improve mechanical response of structure. Whenever a gradient-based method is used to optimization, it is necessary arbitrate an initial placement for the fibers. This initial guess has influence on the result. This work aims to observe the influence of the initial positioning of straight carbon fiber in epoxy resin plates, which had their compliance minimized by Sequential Linear Programming. The maximum displacement is observed too, even if it is not an objective function. The case studies were carried out on the same structure and the number of fibers and its slope were changed. Variation of the force slope was also evaluated. The results confirmed an influence of the initial slope in results. The addition of a greater number of fibers does not always cause a better performance in the design. To achieve the best results, it is essential that the initial arrangement be configured in such a way as to provide proximity of the ends of the fibers and the forces and supports. It's important to try to place the fibers with axial directions close to the axial direction of the force.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
2.80
自引率
8.30%
发文量
37
审稿时长
>12 weeks
期刊最新文献
Reliability-based design of reinforced concrete pipes to satisfy the TEBT Innovative Approach for Enhancing GLULAM Performance with Reinforcing Steel Bars: A BESO-based Study Sequential method of topological optimization in multi-component systems Coupling Modal Analysis with the BEM for the Transient Response of Bar Structures Interacting with Three-Dimensional Soil Profiles Experimental and Numerical Study on Ballistic Impact Response of Vehicle Tires
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1