Circular economy without chemicals controls? Evidence of recirculated toxic plasticizers in flexible PVC products

The global push towards a circular economy (CE) has led to increasing efforts to improve resource utilization efficiency, including plastics recycling. However, the presence of additives, especially those that are toxic, complicates plastics recycling in several ways. Without sufficient controls, the spread of hazardous additives via recycling activities represents a significant public health challenge, particularly among developing nations. This study demonstrates evidence of such uncontrolled recycling, based on an investigation of four household flexible PVC product groups available in Thailand. A versatile pyrolysis/thermal desorption gas chromatography-mass spectrometry (Py/TD-GC-MS) method was employed to simultaneously screen 18 target plasticizers in these products. Di-(2-ethylhexyl) phthalate (DEHP) and diisononyl phthalate (DINP) are the most frequently detected primary plasticizers. DEHP is dominant in vinyl boots, flooring sheets, and hoses, while DINP is dominant in cable sheaths, likely due to a spill-over effect from the EU Restriction of Hazardous Substances (RoHS) directive. Chlorinated paraffins (CPs) are secondary plasticizers that are also detected in most samples, except for boots. The other plasticizers detected include other ortho-phthalates and non-phthalates. These results provide insight into combinatory patterns of plasticizer ‘cocktails’, that comprise restricted, as-yet-unrestricted, and non-restricted plasticizers, embedded in the same individual samples, with a maximum of seven plasticizers found in a single cable sheath. These findings indicate the existence of potentially risky recycling practices that target embedded plasticizers to save cost, without due consideration of their inherent toxicity. Proper interventions are necessary to ensure that CE and chemical safety can be synergized.