{"title":"库克尔赛特页岩油的组成","authors":"Z. Baird, O. Järvik, V. Oja","doi":"10.31219/osf.io/wg42q","DOIUrl":null,"url":null,"abstract":"Pyrolysis oils are usually considered as substitutes for crude oil; however, they can also be sources of valuable compounds. One such pyrolysis oil is shale oil obtained by pyrolysis of kukersite oil shale. K shale oil consists mainly of aromatic structures with straight alkyl side chains. For samples with comparable boiling point distributions, kukersite shale oil is more aromatic than petroleum and many other shale oils. Sulfur, nitrogen, and oxygen are often incorporated into the ring structures, with much of the oxygen also present as phenolic hydroxyl groups.To evaluate the potential for producing some specific compounds from kukersite shale oil foundational data on the composition is needed. Here we analyze new data on the elemental composition and infrared spectrum of kukersite shale oil to investigate its composition. To get detailed information on how the composition of the oil changes depending on the average molecular weight of the oil fraction, the shale oil was separated into narrow boiling fractions using distillation.The results show that the nitrogen content in kukersite shale oil increases with the boiling temperature, with the heaviest fractions containing about 0.3 wt%. Sulfur content reaches a maximum of almost 2 wt% for fractions boiling between 150 and 190 °C, and heavier fractions contain about 0.7 wt%. Similarly, the proportion of hydroxyl groups in kukersite shale oil peaks in the fraction boiling at about 320 °C, with heavier fractions containing more aromatic and alkyl functional groups. The elemental composition of kukersite shale oil is also compared to that of other shale oils.","PeriodicalId":19441,"journal":{"name":"Oil Shale","volume":"86 1","pages":""},"PeriodicalIF":1.3000,"publicationDate":"2022-01-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"The composition of kukersite shale oil\",\"authors\":\"Z. Baird, O. Järvik, V. Oja\",\"doi\":\"10.31219/osf.io/wg42q\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Pyrolysis oils are usually considered as substitutes for crude oil; however, they can also be sources of valuable compounds. One such pyrolysis oil is shale oil obtained by pyrolysis of kukersite oil shale. K shale oil consists mainly of aromatic structures with straight alkyl side chains. For samples with comparable boiling point distributions, kukersite shale oil is more aromatic than petroleum and many other shale oils. Sulfur, nitrogen, and oxygen are often incorporated into the ring structures, with much of the oxygen also present as phenolic hydroxyl groups.To evaluate the potential for producing some specific compounds from kukersite shale oil foundational data on the composition is needed. Here we analyze new data on the elemental composition and infrared spectrum of kukersite shale oil to investigate its composition. To get detailed information on how the composition of the oil changes depending on the average molecular weight of the oil fraction, the shale oil was separated into narrow boiling fractions using distillation.The results show that the nitrogen content in kukersite shale oil increases with the boiling temperature, with the heaviest fractions containing about 0.3 wt%. Sulfur content reaches a maximum of almost 2 wt% for fractions boiling between 150 and 190 °C, and heavier fractions contain about 0.7 wt%. Similarly, the proportion of hydroxyl groups in kukersite shale oil peaks in the fraction boiling at about 320 °C, with heavier fractions containing more aromatic and alkyl functional groups. The elemental composition of kukersite shale oil is also compared to that of other shale oils.\",\"PeriodicalId\":19441,\"journal\":{\"name\":\"Oil Shale\",\"volume\":\"86 1\",\"pages\":\"\"},\"PeriodicalIF\":1.3000,\"publicationDate\":\"2022-01-28\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Oil Shale\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.31219/osf.io/wg42q\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Oil Shale","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.31219/osf.io/wg42q","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
Pyrolysis oils are usually considered as substitutes for crude oil; however, they can also be sources of valuable compounds. One such pyrolysis oil is shale oil obtained by pyrolysis of kukersite oil shale. K shale oil consists mainly of aromatic structures with straight alkyl side chains. For samples with comparable boiling point distributions, kukersite shale oil is more aromatic than petroleum and many other shale oils. Sulfur, nitrogen, and oxygen are often incorporated into the ring structures, with much of the oxygen also present as phenolic hydroxyl groups.To evaluate the potential for producing some specific compounds from kukersite shale oil foundational data on the composition is needed. Here we analyze new data on the elemental composition and infrared spectrum of kukersite shale oil to investigate its composition. To get detailed information on how the composition of the oil changes depending on the average molecular weight of the oil fraction, the shale oil was separated into narrow boiling fractions using distillation.The results show that the nitrogen content in kukersite shale oil increases with the boiling temperature, with the heaviest fractions containing about 0.3 wt%. Sulfur content reaches a maximum of almost 2 wt% for fractions boiling between 150 and 190 °C, and heavier fractions contain about 0.7 wt%. Similarly, the proportion of hydroxyl groups in kukersite shale oil peaks in the fraction boiling at about 320 °C, with heavier fractions containing more aromatic and alkyl functional groups. The elemental composition of kukersite shale oil is also compared to that of other shale oils.
期刊介绍:
The Oil Shale is a scientific-technical open access journal published by the Estonian Academy Publishers in collaboration with the University of Tartu, Tallinn University of Technology, and the Estonian University of Life Sciences.