加热多孔铝与聚碳酸酯的压接

Journal of the Japan Institute of Metals and Materials Pub Date : 2022-01-01 DOI:10.2320/jinstmet.j2021042

Takumi Fujioka, Y. Hangai, H. Mitsugi, K. Amagai

{"title":"加热多孔铝与聚碳酸酯的压接","authors":"Takumi Fujioka, Y. Hangai, H. Mitsugi, K. Amagai","doi":"10.2320/jinstmet.j2021042","DOIUrl":null,"url":null,"abstract":"Porous aluminum is lightweight and has good shock absorption properties. Therefore, by joining thermoplastic resin, which has been widely used in recent years, to porous aluminum, it is possible to achieve both strength and weight reduction while providing shock absorption properties. In this study, bonding of porous aluminum and a polycarbonate plate was performed. The polycarbonate plate was pressed against the heated porous aluminum to bond them. From the tensile test of the bonded specimen, it was found that bonded specimen, which was bonded at 400 ℃ can achieve higher strength than that at 300 ℃ owing to the anchor e ﬀ ect. The bonded specimen, which was bonded at 400 ℃ , exhibited fracture at the porous aluminum part, while the bonded specimen, which was bonded at 300 ℃ , exhibited fracture at the bonded surface.","PeriodicalId":17322,"journal":{"name":"Journal of the Japan Institute of Metals and Materials","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Press Bonding of Heated Porous Aluminum and Polycarbonate\",\"authors\":\"Takumi Fujioka, Y. Hangai, H. Mitsugi, K. Amagai\",\"doi\":\"10.2320/jinstmet.j2021042\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Porous aluminum is lightweight and has good shock absorption properties. Therefore, by joining thermoplastic resin, which has been widely used in recent years, to porous aluminum, it is possible to achieve both strength and weight reduction while providing shock absorption properties. In this study, bonding of porous aluminum and a polycarbonate plate was performed. The polycarbonate plate was pressed against the heated porous aluminum to bond them. From the tensile test of the bonded specimen, it was found that bonded specimen, which was bonded at 400 ℃ can achieve higher strength than that at 300 ℃ owing to the anchor e ﬀ ect. The bonded specimen, which was bonded at 400 ℃ , exhibited fracture at the porous aluminum part, while the bonded specimen, which was bonded at 300 ℃ , exhibited fracture at the bonded surface.\",\"PeriodicalId\":17322,\"journal\":{\"name\":\"Journal of the Japan Institute of Metals and Materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of the Japan Institute of Metals and Materials\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2320/jinstmet.j2021042\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of the Japan Institute of Metals and Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2320/jinstmet.j2021042","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

多孔铝重量轻，减震性能好。因此，通过将近年来广泛使用的热塑性树脂加入多孔铝中，可以在提供减震性能的同时实现强度和重量的降低。在本研究中，进行了多孔铝和聚碳酸酯板的粘合。聚碳酸酯板被压在加热的多孔铝上以粘合它们。通过对粘结试样的拉伸试验发现，由于锚固效应的存在，400℃下粘结试样的强度要高于300℃时的强度。在400℃下粘结的试样在多孔铝部分出现断裂，而在300℃下粘结的试样在粘结面出现断裂。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Press Bonding of Heated Porous Aluminum and Polycarbonate

Porous aluminum is lightweight and has good shock absorption properties. Therefore, by joining thermoplastic resin, which has been widely used in recent years, to porous aluminum, it is possible to achieve both strength and weight reduction while providing shock absorption properties. In this study, bonding of porous aluminum and a polycarbonate plate was performed. The polycarbonate plate was pressed against the heated porous aluminum to bond them. From the tensile test of the bonded specimen, it was found that bonded specimen, which was bonded at 400 ℃ can achieve higher strength than that at 300 ℃ owing to the anchor e ﬀ ect. The bonded specimen, which was bonded at 400 ℃ , exhibited fracture at the porous aluminum part, while the bonded specimen, which was bonded at 300 ℃ , exhibited fracture at the bonded surface.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of the Japan Institute of Metals and Materials

自引率

0.00%

发文量