Pavlos K. Pandis, Stamatoula Papaioannou, Maria K. Koukou, Michalis Gr. Vrachopoulos, Vassilis N. Stathopoulos
{"title":"基于差示扫描量热法的3D打印聚乳酸相变材料封装或作为储热罐容器材料的评价","authors":"Pavlos K. Pandis, Stamatoula Papaioannou, Maria K. Koukou, Michalis Gr. Vrachopoulos, Vassilis N. Stathopoulos","doi":"10.1016/j.egypro.2019.02.088","DOIUrl":null,"url":null,"abstract":"<div><p>Three-D printed PLA (polylactid acid) was tested by means of differential scanning calorimetry after contact with commercially available organic phase change materials (PCMs) in order to be evaluated as an encapsulation or tank material in thermal storage systems. For a period of 40 days contact of 3D printed PLA specimens with two organic PCMs (A44 and A58) in liquid state, promising results were collected. In particular, insignificant mass uptake up to 0.012%/cm<sup>2</sup> for the case of A44 and 0.045%/cm<sup>2</sup> for A58 was observed. At the same time PLA crystallinity as calculated by differential scanning calorimetry data was found to improve over working time. These initial results therefore support the concept of structure on-demand encapsulation design by PLA 3D printing additive manufacturing of heat storage tanks for latent heat utilization of phase change materials.</p></div>","PeriodicalId":11517,"journal":{"name":"Energy Procedia","volume":"161 ","pages":"Pages 429-437"},"PeriodicalIF":0.0000,"publicationDate":"2019-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/j.egypro.2019.02.088","citationCount":"17","resultStr":"{\"title\":\"Differential scanning calorimetry based evaluation of 3D printed PLA for phase change materials encapsulation or as container material of heat storage tanks\",\"authors\":\"Pavlos K. Pandis, Stamatoula Papaioannou, Maria K. Koukou, Michalis Gr. Vrachopoulos, Vassilis N. Stathopoulos\",\"doi\":\"10.1016/j.egypro.2019.02.088\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Three-D printed PLA (polylactid acid) was tested by means of differential scanning calorimetry after contact with commercially available organic phase change materials (PCMs) in order to be evaluated as an encapsulation or tank material in thermal storage systems. For a period of 40 days contact of 3D printed PLA specimens with two organic PCMs (A44 and A58) in liquid state, promising results were collected. In particular, insignificant mass uptake up to 0.012%/cm<sup>2</sup> for the case of A44 and 0.045%/cm<sup>2</sup> for A58 was observed. At the same time PLA crystallinity as calculated by differential scanning calorimetry data was found to improve over working time. These initial results therefore support the concept of structure on-demand encapsulation design by PLA 3D printing additive manufacturing of heat storage tanks for latent heat utilization of phase change materials.</p></div>\",\"PeriodicalId\":11517,\"journal\":{\"name\":\"Energy Procedia\",\"volume\":\"161 \",\"pages\":\"Pages 429-437\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-03-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1016/j.egypro.2019.02.088\",\"citationCount\":\"17\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Energy Procedia\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1876610219311683\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Energy Procedia","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1876610219311683","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Differential scanning calorimetry based evaluation of 3D printed PLA for phase change materials encapsulation or as container material of heat storage tanks
Three-D printed PLA (polylactid acid) was tested by means of differential scanning calorimetry after contact with commercially available organic phase change materials (PCMs) in order to be evaluated as an encapsulation or tank material in thermal storage systems. For a period of 40 days contact of 3D printed PLA specimens with two organic PCMs (A44 and A58) in liquid state, promising results were collected. In particular, insignificant mass uptake up to 0.012%/cm2 for the case of A44 and 0.045%/cm2 for A58 was observed. At the same time PLA crystallinity as calculated by differential scanning calorimetry data was found to improve over working time. These initial results therefore support the concept of structure on-demand encapsulation design by PLA 3D printing additive manufacturing of heat storage tanks for latent heat utilization of phase change materials.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
