Combined geophysical and geotechnical investigation of pavement failure for sustainable construction of Owo-Ikare highway, Southwestern Nigeria

ABSTRACT Very low frequency electromagnetic (VLF-EM) and electrical resistivity methods involving 54 Schlumberger Vertical Electrical Sounding (VES) and 2-D geoelectrical resistivity imaging using dipole-dipole array were utilised along unstable (US) and stable sections (SS) of Owo-Ikare highway to establish causes of its persistent failure. Engineering evaluation of eighteen soil samples from test pits excavated on selected US and SS were investigated. VLF-EM models, geoelectric sections and 2-D resistivity structures revealed existence of conductive subsurface structures, suspected weak zones beneath the US. The road pavement is constructed on poor clayey subgrade with low resistivity values (<100 Ohm-m) which precipitate instability of the highway. Subgrade soils below US have poor geotechnical properties characterized by high moisture content, liquid limit (43.6–63.8% and 20.1–25.2%), plasticity index (13.4–34.4% and 6.5–8.3%), percentage fines (40–67% and 28–30%), A-7-5 to A-7-6 clayey soils, high linear shrinkage (>10%), low compacted density, low CBR, volume changes (Mv) and impervious soils against those of SS. . Thus, deep-weathering, fractured bedrock, uneven bedrock topography with subsurface structures, water-saturated clayey subgrade and unsuitability of the soils for subgrade and subbase road construction are responsible for instability of the road. Replacement of soil beneath the unstable sections and effective drainage enhances its stability.