Technical Evaluation of Different Lightweight Aggregates in Composite Mortar Production with SPSS and ANFİS

In today's construction industry, the production and use of the next generationof materials is becoming increasingly common. These materials; It isused in the formofpaper block handmen,plate products and composite mortars. Especially in recent years, the development of lightweight, flexible, outdoor resistant lightweight aggregate mortar products within the scope of energy efficient products in buildings has also become a necessity. Therefore, in this article, a series of plaster pilgrim samples are prepared in composite form with polymer component by classifying light aggregates of different origin in the size range of 0.5-1 mm and 1-2 mm and using them as the main raw material. In addition, in order to make technical comparison in experimental studies, control mortar samples, which are called traditional mortar used in exterior applications of existing buildings in the construction sector, are also designed. Within the scope of the study, all mortar samples were analyzed within the scope of TS EN 998-1 standard and other related standards in force today and technical findings were examined in detail in the article. In addition, the parameters affecting the result were determined with SPSS (V26) to determine the effectiveness of the experiment input values. Data were trained with ANFIS using parameters affecting the result and results were checked with test data.