Magnetically soft composites based on iron powders for creating components of a two-stator combined electric motor

An experimental prototype of electric motor on permanent (FeNdB) magnets with switchable magnetic flux with two sectioned stators and a rotor using SMC material based on encapsulated metal powders has been developed. The method of manufacture of magnetic cores by powder metallurgy method on the basis of magnetically soft encapsulated titanium dioxide composites has been developed, including computer modeling of magnetic cores components, creation of tooling for their manufacture by pressing and selection of technological modes of pressing. Press set for manufacturing stator components by pressing in the form of a mold was made of hardened 5XHB steel. With its use magnetic components for twostator combined electric motor are pressed. The main electromagnetic characteristics of the components were measured with an express magnetometer. Complex studies showed that the magnetic components have sufficient strength and the necessary electromagnetic characteristics to create a two-stator combined electric motor of this type. An experimental sample of electric motor with maximum power of 15 kW was created on the basis of manufactured magnetic components. Advantages of composite material over electrical steel and other soft magnetic alloys allow providing their wider application in electric machines in order to increase specific power at high speed of rotation with less losses.