Topology optimization for additive manufacturing with strength constraints considering anisotropy

Combining topology optimization and additive manufacturing (AM) is a promising approach to breaking through the limitations of conventional design and developing innovative structures with high performance. However, the unique manufacturing constraints in AM should be considered when developing the topology optimization algorithms for AM. Material anisotropy is one of the common characteristics of AM materials due to the layer-by-layer manufacturing techniques. The present work proposes a topology optimization approach for AM with strength constraints considering anisotropy. The Hoffman failure criterion is adopted to represent the anisotropic strength behaviors of AM materials. Based on the Hoffman failure criteria and the p-norm measure aggregation function, a global strength constraint formulation is established. Under the framework of solid isotropic material with penalization (SIMP), we develop a topology optimization methodology to minimize the structural weight or volume fraction subject to structural stiffness and strength constraints. Several 2D or 3D numerical test cases are performed to validate the effectiveness and performance of the developed method. The results indicated that the proposed method could make full use of material properties by considering anisotropic strength. Besides, the topological optimization considering strength anisotropy could be combined with build direction optimization to further reduce the structural weight.