用于组织和对比度超谐波成像的相控阵的发展

P. van Neer, G. Matte, J. Borsboom, M. Verweij, N. de Jong
{"title":"用于组织和对比度超谐波成像的相控阵的发展","authors":"P. van Neer, G. Matte, J. Borsboom, M. Verweij, N. de Jong","doi":"10.1109/ULTSYM.2007.61","DOIUrl":null,"url":null,"abstract":"For several years, the standard in ultrasound imaging has been second harmonic imaging Recently, a new imaging modality, dubbed super harmonic imaging (SHI), has been proposed. SHI takes advantage of the higher - third to fifth - harmonics produced by either nonlinear propagation or contrast agents. Tissue SHI shows a better suppression of near field artefacts and improved lateral and axial resolutions resulting in images with improved clarity compared to second harmonic imaging. If used with contrast agents SHI produces a higher contrast-to-tissue ratio. To enable SHI with a high dynamic range an array sufficiently sensitive at the frequency up to its fifth harmonic is necessary (bandwidth > 130%). We present the results of custom built test arrays aiming specifically on receive sensitivity and SNR. The initial piezomaterial selection was done using the KLM model. From the selected materials test arrays were built (element size 13 times 0.2 mm2, resonance frequency 4 MHz, no matching layer, backing 5.3 MRayl). A calibrated source generated a pressure pulse, while the test array was located in the far field of the source. From the received pressure wave the element transfer functions and SNR were calculated, after compensation for diffraction and spatial averaging. The receive transfer function and SNR were evaluated on a per element basis. The most sensitive test array had an average peak receive sensitivity of 21 muV/Pa and could detect a long sinusoidal burst with amplitude 1 Pa with 22 dB SNR Using these results a conservative estimate predicts a dynamic range for SHI of 55 dB. These results suggest that in vivo tissue and contrast SHI could be feasible using the current array configuration, which is based on interleaved low and high frequency elements.","PeriodicalId":6355,"journal":{"name":"2007 IEEE Ultrasonics Symposium Proceedings","volume":"93 1","pages":"200-203"},"PeriodicalIF":0.0000,"publicationDate":"2007-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"3F-5 Development of a Phased Array for Tissue and Contrast Super Harmonic Imaging\",\"authors\":\"P. van Neer, G. Matte, J. Borsboom, M. Verweij, N. de Jong\",\"doi\":\"10.1109/ULTSYM.2007.61\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"For several years, the standard in ultrasound imaging has been second harmonic imaging Recently, a new imaging modality, dubbed super harmonic imaging (SHI), has been proposed. SHI takes advantage of the higher - third to fifth - harmonics produced by either nonlinear propagation or contrast agents. Tissue SHI shows a better suppression of near field artefacts and improved lateral and axial resolutions resulting in images with improved clarity compared to second harmonic imaging. If used with contrast agents SHI produces a higher contrast-to-tissue ratio. To enable SHI with a high dynamic range an array sufficiently sensitive at the frequency up to its fifth harmonic is necessary (bandwidth > 130%). We present the results of custom built test arrays aiming specifically on receive sensitivity and SNR. The initial piezomaterial selection was done using the KLM model. From the selected materials test arrays were built (element size 13 times 0.2 mm2, resonance frequency 4 MHz, no matching layer, backing 5.3 MRayl). A calibrated source generated a pressure pulse, while the test array was located in the far field of the source. From the received pressure wave the element transfer functions and SNR were calculated, after compensation for diffraction and spatial averaging. The receive transfer function and SNR were evaluated on a per element basis. The most sensitive test array had an average peak receive sensitivity of 21 muV/Pa and could detect a long sinusoidal burst with amplitude 1 Pa with 22 dB SNR Using these results a conservative estimate predicts a dynamic range for SHI of 55 dB. These results suggest that in vivo tissue and contrast SHI could be feasible using the current array configuration, which is based on interleaved low and high frequency elements.\",\"PeriodicalId\":6355,\"journal\":{\"name\":\"2007 IEEE Ultrasonics Symposium Proceedings\",\"volume\":\"93 1\",\"pages\":\"200-203\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2007-12-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2007 IEEE Ultrasonics Symposium Proceedings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ULTSYM.2007.61\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2007 IEEE Ultrasonics Symposium Proceedings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ULTSYM.2007.61","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

近年来,超声成像一直以二次谐波成像为标准,最近又提出了一种新的成像方式——超谐波成像(SHI)。SHI利用由非线性传播或造影剂产生的较高的三到五次谐波。与二次谐波成像相比,组织SHI显示出更好的近场伪影抑制和改善的横向和轴向分辨率,从而提高了图像的清晰度。如果与造影剂一起使用,SHI可产生更高的组织对比度。为了使SHI具有高动态范围,必须在其五次谐波频率上足够敏感的阵列(带宽> 130%)。我们介绍了专门针对接收灵敏度和信噪比的定制测试阵列的结果。最初的压电材料选择是使用KLM模型完成的。根据所选材料构建测试阵列(元件尺寸13 × 0.2 mm2,共振频率4 MHz,无匹配层,背衬5.3 MRayl)。校准源产生压力脉冲,而测试阵列位于源的远场。根据接收到的压力波,经过衍射补偿和空间平均后,计算出单元传递函数和信噪比。接收传递函数和信噪比在每个元素的基础上进行评估。最灵敏的测试阵列的平均峰值接收灵敏度为21 μ v /Pa,可以检测到幅度为1 Pa的长正弦脉冲,信噪比为22 dB。根据这些结果,保守估计SHI的动态范围为55 dB。这些结果表明,使用当前基于低频和高频交错单元的阵列配置,体内组织和对比SHI是可行的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
3F-5 Development of a Phased Array for Tissue and Contrast Super Harmonic Imaging
For several years, the standard in ultrasound imaging has been second harmonic imaging Recently, a new imaging modality, dubbed super harmonic imaging (SHI), has been proposed. SHI takes advantage of the higher - third to fifth - harmonics produced by either nonlinear propagation or contrast agents. Tissue SHI shows a better suppression of near field artefacts and improved lateral and axial resolutions resulting in images with improved clarity compared to second harmonic imaging. If used with contrast agents SHI produces a higher contrast-to-tissue ratio. To enable SHI with a high dynamic range an array sufficiently sensitive at the frequency up to its fifth harmonic is necessary (bandwidth > 130%). We present the results of custom built test arrays aiming specifically on receive sensitivity and SNR. The initial piezomaterial selection was done using the KLM model. From the selected materials test arrays were built (element size 13 times 0.2 mm2, resonance frequency 4 MHz, no matching layer, backing 5.3 MRayl). A calibrated source generated a pressure pulse, while the test array was located in the far field of the source. From the received pressure wave the element transfer functions and SNR were calculated, after compensation for diffraction and spatial averaging. The receive transfer function and SNR were evaluated on a per element basis. The most sensitive test array had an average peak receive sensitivity of 21 muV/Pa and could detect a long sinusoidal burst with amplitude 1 Pa with 22 dB SNR Using these results a conservative estimate predicts a dynamic range for SHI of 55 dB. These results suggest that in vivo tissue and contrast SHI could be feasible using the current array configuration, which is based on interleaved low and high frequency elements.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
10B-3 Vibrating Interventional Device Detection Using Real-Time 3D Color Doppler P5E-8 The Method of Reverberation-Ray Matrix - A New Matrix Analysis of Waves in Piezoelectric Laminates P1D-4 Characteristics of a Novel Magnetic Field Sensor Using Piezoelectric Vibrations P5C-3 Field Simulation Parameters Design for Realistic Statistical Parameters of Radio - Frequency Ultrasound Images 2F-1 Fabrication and Performance of a High-Frequency Geometrically Focussed Composite Transducer with Triangular Pillar Geometry
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1