E. Chernova, K. E. Gurianov, V. Brotsman, R. Valeev, O. Kapitanova, M. V. Berekchiian, A. Lukashin
{"title":"Brodie法和改进Hummers法制备氧化石墨烯膜输运性能的比较研究","authors":"E. Chernova, K. E. Gurianov, V. Brotsman, R. Valeev, O. Kapitanova, M. V. Berekchiian, A. Lukashin","doi":"10.17586/2220-8054-2023-14-2-272-278","DOIUrl":null,"url":null,"abstract":"A BSTRACT A comparative study of transport characteristics of composite membranes based on graphene oxide prepared by Hummers’ (H-GO) and Brodie (B-GO) methods is presented. By using Raman and XPS spectroscopy combined with gas and vapor measurements at non-zero pressure drop, it is shown that the difference in preparation methods results not only in different composition and microstructure of the membranes, but also in different water vapor permeability and resistance towards pressure drops during membrane performance. The H-GO samples are found to be more defective and stronger oxidized with C/O ratio of 1.8, whereas B-GO revealed a total C/O ratio of 2.6 with more perfect microstructure. The higher oxidation degree of H-GO membranes allows one to achieve higher water vapor permeability (up to ∼ 170 Barrer at 100 % humidity) but dramatically lower stability towards pressure revealing the irreversible loss in permeability up to 46 % during the application of pressure drop of 1 bar. In contrast, B-GO membranes show slightly lower permeability ( ∼ 140 Barrer at 100 % humidity) but enhanced pressure stability revealing the irreversible permeability loss of only 4 % at pressure drop of 1 bar which is about 10-fold smaller compared to H-GO stability. This could be explained by the difference in microstructural features of the H-GO and B-GO. Graphene oxide prepared by Hummer’s method has more flexible and defective nanosheets, whereas Brodie’s method gives rise to more rigid nanosheets with more perfect microstructure. The obtained results suggest that it is possible to prepare graphene oxide membranes with high resistance towards pressure using only the composition-microstructure interplay without additional modification with pressure-stabilizing agents.","PeriodicalId":18782,"journal":{"name":"Nanosystems: Physics, Chemistry, Mathematics","volume":"72 1","pages":""},"PeriodicalIF":0.8000,"publicationDate":"2023-04-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Comparative study of transport properties of membranes based on graphene oxide prepared by Brodie and improved Hummers' methods\",\"authors\":\"E. Chernova, K. E. Gurianov, V. Brotsman, R. Valeev, O. Kapitanova, M. V. Berekchiian, A. Lukashin\",\"doi\":\"10.17586/2220-8054-2023-14-2-272-278\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A BSTRACT A comparative study of transport characteristics of composite membranes based on graphene oxide prepared by Hummers’ (H-GO) and Brodie (B-GO) methods is presented. By using Raman and XPS spectroscopy combined with gas and vapor measurements at non-zero pressure drop, it is shown that the difference in preparation methods results not only in different composition and microstructure of the membranes, but also in different water vapor permeability and resistance towards pressure drops during membrane performance. The H-GO samples are found to be more defective and stronger oxidized with C/O ratio of 1.8, whereas B-GO revealed a total C/O ratio of 2.6 with more perfect microstructure. The higher oxidation degree of H-GO membranes allows one to achieve higher water vapor permeability (up to ∼ 170 Barrer at 100 % humidity) but dramatically lower stability towards pressure revealing the irreversible loss in permeability up to 46 % during the application of pressure drop of 1 bar. In contrast, B-GO membranes show slightly lower permeability ( ∼ 140 Barrer at 100 % humidity) but enhanced pressure stability revealing the irreversible permeability loss of only 4 % at pressure drop of 1 bar which is about 10-fold smaller compared to H-GO stability. This could be explained by the difference in microstructural features of the H-GO and B-GO. Graphene oxide prepared by Hummer’s method has more flexible and defective nanosheets, whereas Brodie’s method gives rise to more rigid nanosheets with more perfect microstructure. The obtained results suggest that it is possible to prepare graphene oxide membranes with high resistance towards pressure using only the composition-microstructure interplay without additional modification with pressure-stabilizing agents.\",\"PeriodicalId\":18782,\"journal\":{\"name\":\"Nanosystems: Physics, Chemistry, Mathematics\",\"volume\":\"72 1\",\"pages\":\"\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2023-04-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Nanosystems: Physics, Chemistry, Mathematics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.17586/2220-8054-2023-14-2-272-278\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"NANOSCIENCE & NANOTECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Nanosystems: Physics, Chemistry, Mathematics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.17586/2220-8054-2023-14-2-272-278","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"NANOSCIENCE & NANOTECHNOLOGY","Score":null,"Total":0}
Comparative study of transport properties of membranes based on graphene oxide prepared by Brodie and improved Hummers' methods
A BSTRACT A comparative study of transport characteristics of composite membranes based on graphene oxide prepared by Hummers’ (H-GO) and Brodie (B-GO) methods is presented. By using Raman and XPS spectroscopy combined with gas and vapor measurements at non-zero pressure drop, it is shown that the difference in preparation methods results not only in different composition and microstructure of the membranes, but also in different water vapor permeability and resistance towards pressure drops during membrane performance. The H-GO samples are found to be more defective and stronger oxidized with C/O ratio of 1.8, whereas B-GO revealed a total C/O ratio of 2.6 with more perfect microstructure. The higher oxidation degree of H-GO membranes allows one to achieve higher water vapor permeability (up to ∼ 170 Barrer at 100 % humidity) but dramatically lower stability towards pressure revealing the irreversible loss in permeability up to 46 % during the application of pressure drop of 1 bar. In contrast, B-GO membranes show slightly lower permeability ( ∼ 140 Barrer at 100 % humidity) but enhanced pressure stability revealing the irreversible permeability loss of only 4 % at pressure drop of 1 bar which is about 10-fold smaller compared to H-GO stability. This could be explained by the difference in microstructural features of the H-GO and B-GO. Graphene oxide prepared by Hummer’s method has more flexible and defective nanosheets, whereas Brodie’s method gives rise to more rigid nanosheets with more perfect microstructure. The obtained results suggest that it is possible to prepare graphene oxide membranes with high resistance towards pressure using only the composition-microstructure interplay without additional modification with pressure-stabilizing agents.