Data report: IODP Expeditiom 366 pore water trace element (V, Mo, Rb, Cs, U, Ba, and Li) compositions

International Ocean Discovery Program (IODP) Expedition 366 focused, in part, on the study of geochemical cycling, matrix alteration and transport, and deep biosphere processes in the Mariana subduction zone. This research was accomplished by sampling the summit and flank regions of three active serpentinite mud volcanoes in the Mariana forearc: Yinazao (Blue Moon), Fantangisña (Celestial), and Asùt Tesoro (Big Blue) Seamounts. These mud volcanoes represent a transect with increasing distance from the trench. Because these mud volcanoes discharge fluids and materials from the subduction channel, they provide a means to characterize thermal, geochemical, and pressure conditions within the seismogenic zone. Previous coring on Ocean Drilling Program (ODP) Legs 125 and 195 at two other serpentinite mud volcanoes (Conical and South Chamorro Seamounts, respectively) and piston, gravity, and push cores from several other Mariana serpentinite mud volcanoes add to this transect of deep-sourced material that is discharged at the seafloor. Pore waters were squeezed from cored serpentinite materials to determine the composition of deep-sourced fluid from the subduction channel and to assess the character, extent, and effect of diagenetic reactions and mixing with seawater on the flanks of three serpentinite seamounts (Yinazao, Fantangisña, and Asùt Tesoro). In addition, two water-sampling temperature probe (WSTP) fluid samples were collected in two of the cased boreholes, each with at least 30 m of screened casing that allowed formation fluids to discharge into the borehole. Here we report shore-based Li, Rb, Cs, Ba, V, Mo, and U measurements of pore waters and one of the WSTP samples. The alkali metals were analyzed to constrain the temperature of reaction in the subduction channel. The other elements were analyzed to assess potential biogenic and diagenetic reactions as the serpentinite material weathers and exchanges with bottom seawater via diffusion. Results were generally consistent with earlier coring and drilling operations, resulting in systematic changes in the composition of the deep-sourced fluid with distance from the trench. Introduction One goal of International Ocean Discovery Program (IODP) Expedition 366 was to elucidate geochemical cycling within the subduction channel of the Mariana forearc system (see the Expedition 366 summary chapter [Fryer et al., 2018b]). Expedition 366 successfully cored the flank and summit regions of three Mariana forearc serpentinite mud volcanoes that are located along a transect with increasing distance from the trench and by inference with depth to the subducted Pacific plate (Figure F1). Previous scientific drilling during Ocean Drilling Program (ODP) Legs 125 and 195 at two other Mariana serpentinite mud volcanoes, Conical and South Chamorro Seamounts, respectively, as well as piston, gravity, and push cores from several other Mariana serpentinite mud volcanoes add additional geochemical data to this transect of active serpentinite mud volcanoes in the Mariana forearc (Fryer, Pearce, Stokking, et al., 1990; Salisbury, Shinohara, Richter, et al., 2002; Mottl et al., 2004; Hulme et al., 2010). One of the expedition’s primary objectives was to determine the composition of deep-sourced fluid to characterize thermal, geochemical, and pressure conditions within the subduction channel by sampling the summit region where newly deposited material is currently being delivered. A second primary objective was to assess the character, extent, and effect of diagenetic reactions and mixing with seawater on the flanks of three serpentinite mud volcanoes, thus C.G. Wheat et al. Data report: pore water trace element compositions providing constraints for the extent of continued serpentinite reactions and potential microbial metabolic activity. To meet these two objectives, 149 whole-round samples were collected for pore water extraction. Extracted pore waters were analyzed shipboard, aliquoted into a range of containers, and preserved for shore-based analyses (see the Expedition 366 summary chapter [Fryer et al., 2018b]). In addition, two fluid samples were collected using the water-sampling temperature probe (WSTP) within two cased boreholes, each with screened casing that allows formation fluids to flow into the borehole while retaining the mud matrix (e.g., ODP Hole 1200C; Wheat et al., 2008). Although pore waters were analyzed for many dissolved ions and gases at sea, shipboard instrumentation limits some critical analyses. This paper remedies this limitation by presenting results from analyses of trace elements, particularly Rb and Cs. These two elements constrained the temperature of the deep-sourced fluid, given their similar chemistries but different mobilization characteristics (e.g., Hulme et al., 2010). Lithium concentration data, another alkali metal, also is presented because many samples have concentrations that were below the detection limit afforded by the shipboard instrument. Other trace elements (V, Mo, Ba, and U) were measured and are presented to provide a gauge for potential reactions and diagenetic pathways on the flanks of the seamount. Methods Coring with the half-length advanced piston corer (HLAPC) was the primary method used to acquire material during Expedition 366 (see the Expedition 366 methods chapter [Fryer et al., 2018a]). We also recovered material with extended core barrel (XCB) and rotary core barrel (RCB) coring. Recovered materials included serpentinite mudflows with clasts from the flanks of each of three edifices and pelagic sediment: Sites U1491 (Yinazao [Blue Moon] Seamount), U1493, U1494, U1495 (Asùt Tesoro [Big Blue] Seamount), and U1498 (Fantangisña [Celestial] Seamount) (Figure F1). The serpentinite mudflow matrix differed in color with depth and, although distinctly disturbed by flow-in during HLAPC and XCB coring, discrete horizons of clast content and matrix constituents remained in place. Serpentinite material also was recovered from the summit regions of each of the three cored mud volcanoes: Sites U1492 (Yinazao Seamount), U1496 (Asùt Tesoro Seamount), and U1497 (Fantangisña Seamount). Serpentinite material and sediment for pore water analysis were immediately taken from the catwalk and placed in a refrigerator to cool samples to near (2°–5°C) the in situ temperature (see the Expedition 366 methods chapter [Fryer et al., 2018a]). Serpentinite and sediment samples were then extracted from the core liner in a nitrogen-filled glove bag, scraped to remove the outer contaminated rind, and placed into a titanium squeezer. The squeezer was removed from the glove bag and inserted into the press. Pore waters were expelled, filtered, aliquoted, preserved, and stored for a range of shore-based analyses. A total of 149 pore water samples and 2 WSTP samples were collected during Expedition 366. Unfortunately, not all of the whole-round samples provided sufficient fluids for shore-based analyses for each solute or isotope. Only the WSTP sample from Hole U1496C is included in this data set. Analyses presented herein were conducted using the identical inductively coupled plasma–mass spectrometry (ICP-MS) and inductively coupled plasma–optical emission spectrometry (ICPOES) methods that Mottl et al. (2004) and Hulme et al. (2010) used, thus ensuring continuity among data sets. Trace elements (V, Mo, Rb, Cs, U, and Ba) were analyzed on 103 samples using an ICP-MS with a 1:50 dilution in 3% ultra-pure nitric acid and standard machine settings (Table T1). Standards were matrix matched with bottom seawater from the eastern flank of the Juan de Fuca Ridge (Wheat et al., 2010). This seawater and a blank were analyzed about every 8 to 10 samples to account for machine drift. The average concentration of this bottom seawater and the standard deviation are listed in Table T1. The lack of sensitivity in the Li measurements at sea led us to analyze 127 samples on an ICP-OES with a 1:25 dilution in 3% ultrapure nitric acid utilizing standard axial machine settings (Table T1). Concurrent with this measurement, we also measured B, Ba, Mn, Fe, Si, and Sr, and we measured Ca, Mg, K, Na, and S on a separate aliquot with a 1:100 dilution. These analyses were conducted to confirm that shipboard results were consistent with results that were generated during prior work (e.g., Mottl et al., 2004; Hulme et al., 2010). As expected, results from these shore-based analyses and shipboard results agree within analytical precision. Duplicate shorebased results are not presented because the entire data set was not analyzed and the IODP database already includes measured values. Deep-sourced fluid compositions for the three seamounts that were drilled during Expedition 366 were calculated based on pore water data from the summit boreholes for which the fluid composition reaches an asymptotic composition with depth. Such profiles are consistent with deep-sourced fluids that upwell faster than the surrounding serpentinite matrix (e.g., Fryer, Pearce, Stokking, et al., 1999; Mottl et al., 2003, 2004; Hulme et al., 2010). Concentrations calculated for the deep-sourced fluid for Yinazao Seamount were generally based on the average concentration of pore waters from Figure F1. Locations of IODP Expedition 366 Sites U1491–U1498 and Site 1200 on South Chamorro Seamount superimposed on a regional bathymetric map. (From the Expedition 366 summary chapter [Fryer et al., 2018b].) -8000 -6000 -4000 -2000 0 -90 00 -9 00 0 -000 -9 00 0 -9 00 0 -8 00 0 -8 00 0 -000 -8 00 0 00