某工业城市强循环道路附近室内细颗粒物(PM2.5)浓度与组成

M. Bodor
{"title":"某工业城市强循环道路附近室内细颗粒物(PM2.5)浓度与组成","authors":"M. Bodor","doi":"10.35219/mms.2020.2.01","DOIUrl":null,"url":null,"abstract":"The purpose of the present work is to present results from a measuring campaign during February-March 2020, in Galati city, Romania, aiming the concentration of fine particulate matter (PM2.5) in air and their heavy metal concentrations, then comparing the results with the air quality determined by the national monitoring system from the same city. Results show considerable differences concerning the air quality measured in this study compared with measurements of the national monitoring system that consist in four stations placed across the city. While values recorded in this study exceeded, in some situations, the maximum target from PM2.5, the reports from the national monitoring system presented a good air quality, using a colour- and number-coding (maximum level 4 out of 6 was reported). Heavy metal concentrations of the fine particulate matters collected in this study was compared with other studies across the world, high Fe and Zn values being registered in agglomerated and industrialized cities, including the city considered in the present study, while in a study conducted in Beijing, China most higher values between all analysed heavy metals were recorded.","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"62 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Indoor Concentration and Composition of Fine Particulate Matter (PM2.5) Near an Intense Circulated Road in an Industrial City\",\"authors\":\"M. Bodor\",\"doi\":\"10.35219/mms.2020.2.01\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The purpose of the present work is to present results from a measuring campaign during February-March 2020, in Galati city, Romania, aiming the concentration of fine particulate matter (PM2.5) in air and their heavy metal concentrations, then comparing the results with the air quality determined by the national monitoring system from the same city. Results show considerable differences concerning the air quality measured in this study compared with measurements of the national monitoring system that consist in four stations placed across the city. While values recorded in this study exceeded, in some situations, the maximum target from PM2.5, the reports from the national monitoring system presented a good air quality, using a colour- and number-coding (maximum level 4 out of 6 was reported). Heavy metal concentrations of the fine particulate matters collected in this study was compared with other studies across the world, high Fe and Zn values being registered in agglomerated and industrialized cities, including the city considered in the present study, while in a study conducted in Beijing, China most higher values between all analysed heavy metals were recorded.\",\"PeriodicalId\":22358,\"journal\":{\"name\":\"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science\",\"volume\":\"62 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-06-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.35219/mms.2020.2.01\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35219/mms.2020.2.01","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

本工作的目的是介绍2020年2月至3月在罗马尼亚加拉蒂市进行的一项测量活动的结果,旨在测量空气中细颗粒物(PM2.5)的浓度及其重金属浓度,然后将结果与同一城市国家监测系统确定的空气质量进行比较。结果显示,本研究中测量的空气质量与全国监测系统的测量结果有相当大的差异,该监测系统由位于城市各处的四个站点组成。虽然本研究记录的数值在某些情况下超过了PM2.5的最大目标,但国家监测系统的报告显示空气质量良好,使用颜色和数字编码(报告的最高级别为6级中的第4级)。本研究收集的细颗粒物重金属浓度与世界各地的其他研究进行了比较,在包括本研究所考虑的城市在内的集聚和工业化城市中记录了高铁和高锌值,而在中国北京进行的一项研究中记录了所有分析重金属中最高的值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Indoor Concentration and Composition of Fine Particulate Matter (PM2.5) Near an Intense Circulated Road in an Industrial City
The purpose of the present work is to present results from a measuring campaign during February-March 2020, in Galati city, Romania, aiming the concentration of fine particulate matter (PM2.5) in air and their heavy metal concentrations, then comparing the results with the air quality determined by the national monitoring system from the same city. Results show considerable differences concerning the air quality measured in this study compared with measurements of the national monitoring system that consist in four stations placed across the city. While values recorded in this study exceeded, in some situations, the maximum target from PM2.5, the reports from the national monitoring system presented a good air quality, using a colour- and number-coding (maximum level 4 out of 6 was reported). Heavy metal concentrations of the fine particulate matters collected in this study was compared with other studies across the world, high Fe and Zn values being registered in agglomerated and industrialized cities, including the city considered in the present study, while in a study conducted in Beijing, China most higher values between all analysed heavy metals were recorded.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
25
审稿时长
8 weeks
期刊最新文献
Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Top Cover Additive Manufacturing by 3D Printing of the Landmark Gas Reduction R2-M60x2, Using ABS+ Filament Advanced Methods to Characterize the Structural Materials of Religious Buildings Construction Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Lubrication Ring Research on the Rice Bran Oil – Flammability Tests on a High Temperature Surface
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1