冷轧管材工艺因素对变形锥沿q因子分布变化的影响分析

S. Pilipenko
{"title":"冷轧管材工艺因素对变形锥沿q因子分布变化的影响分析","authors":"S. Pilipenko","doi":"10.17073/0021-3438-2019-3-30-35","DOIUrl":null,"url":null,"abstract":"The paper provides the results of studying the effect of technological factors of the cold pipe rolling process on the changingof Q-factor distribution along the deformation cone. The Q-factor value, which is the relationship between actual deformation on the wall thickness and actual deformation on the pipe mean diameter, and the pattern of its distribution along the deformation cone are controlledvalues when rolling pipes from titanium and zirconium alloys of a certain range. The Q-factor defines whether metal grains will be oriented radially or tangentially. It is desirable that Q-factor f luctuate around its definite value with low amplitude along the entire deformation cone. It is determined that the method used to calculate the pipe wall thickness distribution along the deformation cone has a significant effect on the change in the Q-factor distribution along the deformation cone. The advantages of using mandrels with a curvilinear generatrix of the working surface profile are confirmed. Dependences ascertained in the article can be used to calculate the schedules of rolling and calibration of cold pilgering mill tools.","PeriodicalId":14523,"journal":{"name":"Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2019-06-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Analysis of the influence of cold pipe rolling technological factors on the change in Q-factor distribution along the deformation cone\",\"authors\":\"S. Pilipenko\",\"doi\":\"10.17073/0021-3438-2019-3-30-35\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper provides the results of studying the effect of technological factors of the cold pipe rolling process on the changingof Q-factor distribution along the deformation cone. The Q-factor value, which is the relationship between actual deformation on the wall thickness and actual deformation on the pipe mean diameter, and the pattern of its distribution along the deformation cone are controlledvalues when rolling pipes from titanium and zirconium alloys of a certain range. The Q-factor defines whether metal grains will be oriented radially or tangentially. It is desirable that Q-factor f luctuate around its definite value with low amplitude along the entire deformation cone. It is determined that the method used to calculate the pipe wall thickness distribution along the deformation cone has a significant effect on the change in the Q-factor distribution along the deformation cone. The advantages of using mandrels with a curvilinear generatrix of the working surface profile are confirmed. Dependences ascertained in the article can be used to calculate the schedules of rolling and calibration of cold pilgering mill tools.\",\"PeriodicalId\":14523,\"journal\":{\"name\":\"Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-06-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.17073/0021-3438-2019-3-30-35\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Izvestiya Vuzov Tsvetnaya Metallurgiya (Proceedings of Higher Schools Nonferrous Metallurgy","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.17073/0021-3438-2019-3-30-35","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

本文给出了冷轧过程中工艺因素对q因子沿变形锥分布变化影响的研究结果。在一定范围内轧制钛锆合金管材时,壁厚实际变形量与管径实际变形量之间的关系q因子值及其沿变形锥的分布规律是可控的。q因子决定了金属晶粒是径向取向还是切向取向。期望q因子沿整个变形锥沿其定值附近低振幅波动。计算结果表明,沿变形锥方向管壁厚度分布的计算方法对沿变形锥方向q因子分布的变化有显著影响。验证了工作面轮廓曲线母线芯芯的优点。文中确定的相关性可用于计算轧制进度和冷镦铣刀的校准。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Analysis of the influence of cold pipe rolling technological factors on the change in Q-factor distribution along the deformation cone
The paper provides the results of studying the effect of technological factors of the cold pipe rolling process on the changingof Q-factor distribution along the deformation cone. The Q-factor value, which is the relationship between actual deformation on the wall thickness and actual deformation on the pipe mean diameter, and the pattern of its distribution along the deformation cone are controlledvalues when rolling pipes from titanium and zirconium alloys of a certain range. The Q-factor defines whether metal grains will be oriented radially or tangentially. It is desirable that Q-factor f luctuate around its definite value with low amplitude along the entire deformation cone. It is determined that the method used to calculate the pipe wall thickness distribution along the deformation cone has a significant effect on the change in the Q-factor distribution along the deformation cone. The advantages of using mandrels with a curvilinear generatrix of the working surface profile are confirmed. Dependences ascertained in the article can be used to calculate the schedules of rolling and calibration of cold pilgering mill tools.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
ML5 alloy structure and properties at different modification methods Structure and properties of coarse-grained WC-Со hard metals with extra homogeneous microstructure Production of silumins using silicon production waste Al-Ca-M-La-Fe in-situ aluminum-matrix eutectic composites High-temperature ion nitriding of T15K6 indexable carbide inserts
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1