Studying the Effect of High Temperature on the Content of Glass and Brick Waste Binders after Alkaline Activation

The high-temperature mechanical behaviour of a glass and brick waste alkaline to synthesize geopolymer mortar was studied. The mortar in question contained 100% glass powder GWP and 90% of a blend of brick waste GBWP, brick waste BWP and a solid activator (10 mol concentration of NaOH mixed with glass water (Na2SiO3). The material was tested during exposure to high temperatures to establish its density, weight loss, compressive strength, accessible porosity in water, expansion of pastes, XRD and TG-DSC analysis using an innovative methodology to notch the hydrated geopolymers paste specimens after exposed to five maximum temperatures, 100℃, 200℃, 400℃, 600℃ and 800℃ without any imposed load during the heating. The results were found that GBWP gave better values in compressive strength, reaching 38.3 MPa at 100℃ and other proportional values at 400℃, 600℃ respectively compared with GWP. As for the density, the high temperature contributed to its decrease, which caused the presence of high porosity at 800℃. On the other hand, the high temperature helped to improve the mechanical and physical behavior of BWP, where the resistance reached 24.91 MPa at 200℃. In addition, for the microstructure and different particles related to the interactions were identified through the XRD and TG-DSC analysis procedure, in order to know the highest temperatures that allow changing the structure and properties of this type of alternative binders.