基于高温蠕变变形的Q345c板坯连续弯曲矫直技术

IF 3.1 2区 材料科学 Q1 METALLURGY & METALLURGICAL ENGINEERING Journal of Iron and Steel Research(International) Pub Date : 2017-06-01 DOI:10.1016/S1006-706X(17)30090-0
Long Guo, Xing-zhong Zhang, Chang-xi Feng
{"title":"基于高温蠕变变形的Q345c板坯连续弯曲矫直技术","authors":"Long Guo,&nbsp;Xing-zhong Zhang,&nbsp;Chang-xi Feng","doi":"10.1016/S1006-706X(17)30090-0","DOIUrl":null,"url":null,"abstract":"<div><p>A new continuous bending and straightening casting curve with the aim of full using of high-temperature creep deformation was proposed. The curvature of bending and straightening segment varies as sine law with arc length. The basic arc segment is shortened significantly so that the length of bending and straightening area can be extended and the time of creep behavior can be increased. The distance from solidifying front in the slab was calculated at 1200 °C by finite element method. The maximum strain rate of new casting curve at different locations inside the slab is 6.39 × 10<sup>−5</sup> s<sup>−1</sup> during the bending segment and it tends to be 3.70 × 10<sup>−5</sup> s<sup>−1</sup> in the straightening segment. The minimum creep strain rate is 7.45 × 10<sup>−5</sup> s<sup>−1</sup> when the stress is 14 MPa at 1200 °C. The strain rate of new casting machine can be less than the minimum creep strain rate. Thus, there is only creep deformation and no plastic deformation in the bending and straightening process of steel continuous casting. Deformation of slabs depending on creep behavior only comes true. It is helpful for the design of the new casting machine and improvement of old casting machine depending on high temperature creep property.</p></div>","PeriodicalId":64470,"journal":{"name":"Journal of Iron and Steel Research(International)","volume":"24 6","pages":"Pages 595-600"},"PeriodicalIF":3.1000,"publicationDate":"2017-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/S1006-706X(17)30090-0","citationCount":"2","resultStr":"{\"title\":\"Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation\",\"authors\":\"Long Guo,&nbsp;Xing-zhong Zhang,&nbsp;Chang-xi Feng\",\"doi\":\"10.1016/S1006-706X(17)30090-0\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>A new continuous bending and straightening casting curve with the aim of full using of high-temperature creep deformation was proposed. The curvature of bending and straightening segment varies as sine law with arc length. The basic arc segment is shortened significantly so that the length of bending and straightening area can be extended and the time of creep behavior can be increased. The distance from solidifying front in the slab was calculated at 1200 °C by finite element method. The maximum strain rate of new casting curve at different locations inside the slab is 6.39 × 10<sup>−5</sup> s<sup>−1</sup> during the bending segment and it tends to be 3.70 × 10<sup>−5</sup> s<sup>−1</sup> in the straightening segment. The minimum creep strain rate is 7.45 × 10<sup>−5</sup> s<sup>−1</sup> when the stress is 14 MPa at 1200 °C. The strain rate of new casting machine can be less than the minimum creep strain rate. Thus, there is only creep deformation and no plastic deformation in the bending and straightening process of steel continuous casting. Deformation of slabs depending on creep behavior only comes true. It is helpful for the design of the new casting machine and improvement of old casting machine depending on high temperature creep property.</p></div>\",\"PeriodicalId\":64470,\"journal\":{\"name\":\"Journal of Iron and Steel Research(International)\",\"volume\":\"24 6\",\"pages\":\"Pages 595-600\"},\"PeriodicalIF\":3.1000,\"publicationDate\":\"2017-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1016/S1006-706X(17)30090-0\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Iron and Steel Research(International)\",\"FirstCategoryId\":\"1087\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1006706X17300900\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Iron and Steel Research(International)","FirstCategoryId":"1087","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1006706X17300900","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 2

摘要

以充分利用高温蠕变变形为目的,提出了一种新的连续弯曲矫直铸造曲线。弯曲和矫直段的曲率随弧长呈正弦规律变化。基本弧段明显缩短,从而延长了弯曲矫直区域的长度,增加了蠕变行为的时间。在1200℃时,用有限元法计算了板坯到凝固前沿的距离。新铸曲线在板坯内不同位置的最大应变率在弯曲段为6.39 × 10−5 s−1,在矫直段趋于3.70 × 10−5 s−1。在1200℃下,当应力为14 MPa时,蠕变应变速率最小为7.45 × 10−5 s−1。新型铸造机的应变速率可以小于最小蠕变应变速率。因此,钢连铸弯矫直过程中只有蠕变,没有塑性变形。板的变形取决于蠕变行为。对高温蠕变性能的研究有助于新铸锭机的设计和旧铸锭机的改进。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Continuous bending and straightening technology of Q345c slab based on high-temperature creep deformation

A new continuous bending and straightening casting curve with the aim of full using of high-temperature creep deformation was proposed. The curvature of bending and straightening segment varies as sine law with arc length. The basic arc segment is shortened significantly so that the length of bending and straightening area can be extended and the time of creep behavior can be increased. The distance from solidifying front in the slab was calculated at 1200 °C by finite element method. The maximum strain rate of new casting curve at different locations inside the slab is 6.39 × 10−5 s−1 during the bending segment and it tends to be 3.70 × 10−5 s−1 in the straightening segment. The minimum creep strain rate is 7.45 × 10−5 s−1 when the stress is 14 MPa at 1200 °C. The strain rate of new casting machine can be less than the minimum creep strain rate. Thus, there is only creep deformation and no plastic deformation in the bending and straightening process of steel continuous casting. Deformation of slabs depending on creep behavior only comes true. It is helpful for the design of the new casting machine and improvement of old casting machine depending on high temperature creep property.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
4.30
自引率
0.00%
发文量
2879
审稿时长
3.0 months
期刊最新文献
Influence of laser re-melting and vacuum heat treatment on plasma-sprayed FeCoCrNiAl alloy coatings Modeling deformation resistance for hot rolling based on generalized additive model Effect of solution pH, Cl− concentration and temperature on electrochemical behavior of PH13-8Mo steel in acidic environments Effects of iron compounds on pyrolysis behavior of coals and metallurgical properties of resultant cokes Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316L steel and API X70 high-strength low-alloy steel
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1