Piezoelectric Configuration for Generating Electricity Using Waves Power

This study is aimed at determining the piezoelectric configuration for generating electricity from wave power through the design of a prototype model named Cov-TOTal. The study was carried out in Tomini Bay, Lopo Village, Batudaa Pantai District, Gorontalo Regency, located at approximately ±50 meters from the shoreline, while the piezoelectric construction was arranged in parallel with varying numbers of 28, 70, and 90 pieces. The result showed that the amount of piezoelectric configuration affects the value of the voltage and electric current generated by the Cov-TOTal model. Furthermore, the average electric voltage values were 17.58, 20.76, and 29.85 volts, while the average current was 1.16, 1.73, and 2.01 mA for each piezoelectric amount. Therefore, the largest values of power and electrical energy for each piezoelectric are 16.65 mW and 0.56 joules, 31.82 mW and 1.20 joules, and 44.59 mW and 1.77 joules, respectively. This study concluded that the amount of piezoelectric configuration has a significant effect on the voltage, current, power, and electrical energy produced.