壁炉砖生产过程中超细颗粒的排放

K. Lach, Ivona Smolová
{"title":"壁炉砖生产过程中超细颗粒的排放","authors":"K. Lach, Ivona Smolová","doi":"10.2495/EI-V2-N4-325-335","DOIUrl":null,"url":null,"abstract":"studies in the field of the adverse effect of inhaled particles show that not only particle mass is crucial but also particle size and specific surface are. The main objective of this study was to investigate and characterise ultrafine particle (ufp) emissions on workplace in the manufacture of ceramic tiles at two problematic places at ceramic tiles kiln and spraying glazing suspension. The process of creating of glaze on the surface of stove tiles is performed at temperatures reaching up to 1,100c. at this high temperature occurs fugitive emissions from glaze and ceramic consist of vapours and ufp containing various heavy metals such as pb, cr, cu, mo, Zr, etc. from glaze and ceramic, respectively. The data obtained from the measurements confirmed the significant emissions of ufp at the two chosen workplaces, but the composition of particles, their size distribution and other parameters differed from one to another. in case of the workplace near the kiln, the following parameters were noted: total concentration of particles ranging from 5.6 nm to 560 nm is 2×10–4×10 n/cm; median of size distribution is 37 nm, median of mass distribution is 153 nm, particle surface deposited in tracheobronchial (Tb) part of lungs is 200 μm/cm, particle surface deposited in alveolar (a) part of lungs is 450 μm/cm and the concentration of pb is 3,744 μg/m. in the case of the manual spraying of the glaze suspension on tiles, the following parameters were noted: total concentration of particles is 2×10 n/cm; median of size distribution is 11 nm, median of mass distribution is 177 nm, particle surface deposited in Tb part of lungs is 50 μm/cm, particle surface deposited in a part of lungs is 170 μm/cm and the concentration of pb is 1.9 μg/m. it can be concluded from the data above that both the measured workplaces meet the permissible exposure limit for lead, which is 50 μg/m. it is important to note that, in this study, the health impacts of ufp on staff and employees were not studied.","PeriodicalId":34209,"journal":{"name":"International Journal of Environmental Impacts","volume":"14 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-08-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The emission of Ultrafine Particles in the manufacture of fireplace ceramic tiles\",\"authors\":\"K. Lach, Ivona Smolová\",\"doi\":\"10.2495/EI-V2-N4-325-335\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"studies in the field of the adverse effect of inhaled particles show that not only particle mass is crucial but also particle size and specific surface are. The main objective of this study was to investigate and characterise ultrafine particle (ufp) emissions on workplace in the manufacture of ceramic tiles at two problematic places at ceramic tiles kiln and spraying glazing suspension. The process of creating of glaze on the surface of stove tiles is performed at temperatures reaching up to 1,100c. at this high temperature occurs fugitive emissions from glaze and ceramic consist of vapours and ufp containing various heavy metals such as pb, cr, cu, mo, Zr, etc. from glaze and ceramic, respectively. The data obtained from the measurements confirmed the significant emissions of ufp at the two chosen workplaces, but the composition of particles, their size distribution and other parameters differed from one to another. in case of the workplace near the kiln, the following parameters were noted: total concentration of particles ranging from 5.6 nm to 560 nm is 2×10–4×10 n/cm; median of size distribution is 37 nm, median of mass distribution is 153 nm, particle surface deposited in tracheobronchial (Tb) part of lungs is 200 μm/cm, particle surface deposited in alveolar (a) part of lungs is 450 μm/cm and the concentration of pb is 3,744 μg/m. in the case of the manual spraying of the glaze suspension on tiles, the following parameters were noted: total concentration of particles is 2×10 n/cm; median of size distribution is 11 nm, median of mass distribution is 177 nm, particle surface deposited in Tb part of lungs is 50 μm/cm, particle surface deposited in a part of lungs is 170 μm/cm and the concentration of pb is 1.9 μg/m. it can be concluded from the data above that both the measured workplaces meet the permissible exposure limit for lead, which is 50 μg/m. it is important to note that, in this study, the health impacts of ufp on staff and employees were not studied.\",\"PeriodicalId\":34209,\"journal\":{\"name\":\"International Journal of Environmental Impacts\",\"volume\":\"14 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-08-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Environmental Impacts\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2495/EI-V2-N4-325-335\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Environmental Impacts","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2495/EI-V2-N4-325-335","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

对吸入颗粒不良反应的研究表明,不仅颗粒质量至关重要,颗粒大小和比表面积也至关重要。本研究的主要目的是调查和表征瓷砖生产工作场所在瓷砖窑和喷涂玻璃悬浮液两个问题场所的超细颗粒(ufp)排放。在炉砖表面形成釉的过程是在高达1100摄氏度的温度下进行的。在这种高温下,釉料和陶瓷中的逸出物分别由釉料和陶瓷中含有铅、铬、铜、钼、锆等多种重金属的蒸气和杂质组成。从测量中获得的数据证实,在两个选定的工作场所有大量的ufp排放,但颗粒的组成、大小分布和其他参数各不相同。在靠近窑的工作场所,注意以下参数:5.6 nm至560 nm的颗粒总浓度为2×10-4×10 n/cm;大小分布中值为37 nm,质量分布中值为153 nm,肺气管支气管(Tb)部颗粒表面沉积量为200 μm/cm,肺泡(a)部颗粒表面沉积量为450 μm/cm, pb浓度为3744 μg/m。在手工喷涂瓷砖釉悬液的情况下,需要注意以下参数:颗粒总浓度为2×10 n/cm;粒径分布中值为11 nm,质量分布中值为177 nm,肺Tb部位颗粒表面沉积量为50 μm/cm,肺部分颗粒表面沉积量为170 μm/cm, pb浓度为1.9 μg/m。由上述数据可知,两个被测工作场所均满足铅的允许接触限值50 μg/m。值得注意的是,在本研究中,未研究ufp对工作人员和雇员的健康影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
The emission of Ultrafine Particles in the manufacture of fireplace ceramic tiles
studies in the field of the adverse effect of inhaled particles show that not only particle mass is crucial but also particle size and specific surface are. The main objective of this study was to investigate and characterise ultrafine particle (ufp) emissions on workplace in the manufacture of ceramic tiles at two problematic places at ceramic tiles kiln and spraying glazing suspension. The process of creating of glaze on the surface of stove tiles is performed at temperatures reaching up to 1,100c. at this high temperature occurs fugitive emissions from glaze and ceramic consist of vapours and ufp containing various heavy metals such as pb, cr, cu, mo, Zr, etc. from glaze and ceramic, respectively. The data obtained from the measurements confirmed the significant emissions of ufp at the two chosen workplaces, but the composition of particles, their size distribution and other parameters differed from one to another. in case of the workplace near the kiln, the following parameters were noted: total concentration of particles ranging from 5.6 nm to 560 nm is 2×10–4×10 n/cm; median of size distribution is 37 nm, median of mass distribution is 153 nm, particle surface deposited in tracheobronchial (Tb) part of lungs is 200 μm/cm, particle surface deposited in alveolar (a) part of lungs is 450 μm/cm and the concentration of pb is 3,744 μg/m. in the case of the manual spraying of the glaze suspension on tiles, the following parameters were noted: total concentration of particles is 2×10 n/cm; median of size distribution is 11 nm, median of mass distribution is 177 nm, particle surface deposited in Tb part of lungs is 50 μm/cm, particle surface deposited in a part of lungs is 170 μm/cm and the concentration of pb is 1.9 μg/m. it can be concluded from the data above that both the measured workplaces meet the permissible exposure limit for lead, which is 50 μg/m. it is important to note that, in this study, the health impacts of ufp on staff and employees were not studied.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
1.20
自引率
0.00%
发文量
32
审稿时长
21 weeks
期刊最新文献
Spatial Pattern Analysis of Vegetation on Surakarta Urban Fringe Area Customer Loyalty in Green Marketing Research: A Systematic Review Optimization of Mangrove Ecosystem Services Based on Comparison of Stand Carbon Stock Estimates in Climate Change Mitigation Land Degradation Associated with Illegal Sand Mining in Rural Areas and Lack of Formalization of the Industry in South Africa: A Review The Effectiveness of Carbon Pricing Mechanism in Steering Financial Flows Toward Sustainable Projects
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1