制备条件对反模聚合物稳定胆甾质织构膜电光性能的影响

Q4 Engineering 工程设计学报 Pub Date : 2015-01-01 DOI:10.13374/J.ISSN.2095-9389.2015.06.013
H. Cao, Yunjie Yin, Ling Xiao, Dong Wang, Zhou Yang
{"title":"制备条件对反模聚合物稳定胆甾质织构膜电光性能的影响","authors":"H. Cao, Yunjie Yin, Ling Xiao, Dong Wang, Zhou Yang","doi":"10.13374/J.ISSN.2095-9389.2015.06.013","DOIUrl":null,"url":null,"abstract":"Reverse-mode polymer-stabilized cholesteric texture( R-PSCT) films were prepared from ultraviolet polymerization-induced phase separation in a mixture of 1,4-di[4-( 6-acryloyloxyhexyloxy) benzoyloxy]-2-methylbenzene( C6M) /( S)-4'-( 2-methylbutyl) biphenyl-4-carbonitrile( CB15) /2,2-dimethopxy-1,2-diphenyl-ethanone( IRG651) / SLC1717. The effects of curing temperature and ultraviolet( UV) irradiance on the electro-optical properties of R-PSCT films were studied. When the curing temperature increases or the ultraviolet irradiance decreases,the driving voltage,the contrast ratio and the on-state response time decrease,but the off-state response time increases. The R-PSCT film prepared at a curing temperature of 293 K and an ultraviolet irradiance of 0. 75 m W·cm- 2has better electro-optical properties.","PeriodicalId":31263,"journal":{"name":"工程设计学报","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2015-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of preparing conditions on the electro-optical properties of reverse-mode polymer-stabilized cholesteric texture films\",\"authors\":\"H. Cao, Yunjie Yin, Ling Xiao, Dong Wang, Zhou Yang\",\"doi\":\"10.13374/J.ISSN.2095-9389.2015.06.013\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Reverse-mode polymer-stabilized cholesteric texture( R-PSCT) films were prepared from ultraviolet polymerization-induced phase separation in a mixture of 1,4-di[4-( 6-acryloyloxyhexyloxy) benzoyloxy]-2-methylbenzene( C6M) /( S)-4'-( 2-methylbutyl) biphenyl-4-carbonitrile( CB15) /2,2-dimethopxy-1,2-diphenyl-ethanone( IRG651) / SLC1717. The effects of curing temperature and ultraviolet( UV) irradiance on the electro-optical properties of R-PSCT films were studied. When the curing temperature increases or the ultraviolet irradiance decreases,the driving voltage,the contrast ratio and the on-state response time decrease,but the off-state response time increases. The R-PSCT film prepared at a curing temperature of 293 K and an ultraviolet irradiance of 0. 75 m W·cm- 2has better electro-optical properties.\",\"PeriodicalId\":31263,\"journal\":{\"name\":\"工程设计学报\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"工程设计学报\",\"FirstCategoryId\":\"1087\",\"ListUrlMain\":\"https://doi.org/10.13374/J.ISSN.2095-9389.2015.06.013\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"工程设计学报","FirstCategoryId":"1087","ListUrlMain":"https://doi.org/10.13374/J.ISSN.2095-9389.2015.06.013","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

摘要

以1,4-二[4-(6-丙烯氧基己基)苯甲酰氧基]-2-甲苯(C6M) /(S)-4′-(2-甲基丁基)联苯-4-碳腈(CB15) /2,2-二甲基-1,2-二苯基乙烷(IRG651) / SLC1717为溶剂,采用紫外聚合诱导相分离法制备了反模式聚合物稳定甾醇结构(R-PSCT)薄膜。研究了固化温度和紫外辐照度对R-PSCT薄膜电光性能的影响。当固化温度升高或紫外辐照度降低时,驱动电压、对比度和导通响应时间降低,而关断响应时间增加。制备的R-PSCT薄膜固化温度为293 K,紫外辐照度为0。75 m W·cm- 2具有较好的光电性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Effects of preparing conditions on the electro-optical properties of reverse-mode polymer-stabilized cholesteric texture films
Reverse-mode polymer-stabilized cholesteric texture( R-PSCT) films were prepared from ultraviolet polymerization-induced phase separation in a mixture of 1,4-di[4-( 6-acryloyloxyhexyloxy) benzoyloxy]-2-methylbenzene( C6M) /( S)-4'-( 2-methylbutyl) biphenyl-4-carbonitrile( CB15) /2,2-dimethopxy-1,2-diphenyl-ethanone( IRG651) / SLC1717. The effects of curing temperature and ultraviolet( UV) irradiance on the electro-optical properties of R-PSCT films were studied. When the curing temperature increases or the ultraviolet irradiance decreases,the driving voltage,the contrast ratio and the on-state response time decrease,but the off-state response time increases. The R-PSCT film prepared at a curing temperature of 293 K and an ultraviolet irradiance of 0. 75 m W·cm- 2has better electro-optical properties.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
工程设计学报
工程设计学报 Engineering-Engineering (miscellaneous)
CiteScore
0.60
自引率
0.00%
发文量
2447
审稿时长
14 weeks
期刊介绍: Chinese Journal of Engineering Design is a reputable journal published by Zhejiang University Press Co., Ltd. It was founded in December, 1994 as the first internationally cooperative journal in the area of engineering design research. Administrated by the Ministry of Education of China, it is sponsored by both Zhejiang University and Chinese Society of Mechanical Engineering. Zhejiang University Press Co., Ltd. is fully responsible for its bimonthly domestic and oversea publication. Its page is in A4 size. This journal is devoted to reporting most up-to-date achievements of engineering design researches and therefore, to promote the communications of academic researches and their applications to industry. Achievments of great creativity and practicablity are extraordinarily desirable. Aiming at supplying designers, developers and researchers of diversified technical artifacts with valuable references, its content covers all aspects of design theory and methodology, as well as its enabling environment, for instance, creative design, concurrent design, conceptual design, intelligent design, web-based design, reverse engineering design, industrial design, design optimization, tribology, design by biological analogy, virtual reality in design, structural analysis and design, design knowledge representation, design knowledge management, design decision-making systems, etc.
期刊最新文献
Innovative design of box elevator epidemic prevention function integrating AD and TRIZ Discrete element simulation for evolution characteristics of multi-funnel mineral-rock force chain under flexible isolation layer Application progress of artificial intelligence in military confrontation Cloud storage data integrity audit based on an index–stub table Clinical named entity recognition from Chinese electronic medical records using a double-layer annotation model combining a domain dictionary with CRF
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1