A 1.8 V supply multi-frequency digitally trimmable on-chip IC oscillator with low-voltage detection capability

Abstract

The design of a 1.8V power supply, multi-frequency on-chip IC oscillator with a built-in low voltage detection (LVD) circuitry is described. Since the modules share the same bandgap cell, the system includes a new bandgap isolation strategy based on wide swing cascode current mirrors to reduce noise coupling into the LVD. The IC oscillator generates four selectable clock frequencies: 4 MHz and 8 MHz from 1.8 V to 5.5 V, 12 MHz and 22 MHz from 2.7 V to 5.5 V. After fine-tuning the oscillator via digital trimming its output frequency varies less than /spl plusmn/2.5% around the target frequency over supply ranges and from -40 to 125/spl deg/C. The measured clock jitter is below 0.1% whereas the recover time from stop is 5 /spl mu/s. The low voltage detection circuit monitors the supply voltage applied to the system and generates the appropriate warning or even initiates a system shutdown before the in-circuit SoC presents malfunction. The module was implemented in a 0.5 /spl mu/m CMOS technology, occupies an area of 360/spl times/530 /spl mu/m/sup 2/ and requires no external reference or components.